曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

WideClient Version 6.51
Flight Simulator Running
Testing Framerate
Avg / Min / Max: 29.6 / 24.5 / 30.7
OK - GC Detected
GC Build 84
OK - FMC Detected (CDU or MCDU)
FMC Build 77
OK - A/P Detected (MCP or FCU)
A/P Build 77
Local DLL Files Found:
pm.dll dated: 1/17/2006 9:22:27 AM
Checking FS Path
OK - Reported FS Path \\FS2004\Flight Simulator 9\
Trying to access FS Path
OK - Read access to FS Path
OK - Read/Write access to FS Path
OK - Read/Write access to FS Path
Wide Server reports:
788687 Connected to computer "COPILOT" running WideClient version 6.510 (skt=1192)
788812 Connected to computer "CAPTAIN" running WideClient version 6.510 (skt=1204)
Looking for NETDIR from CDU
Reported NetDir is: \\fmc\netdir\
Checking PMNETDIR Path (FMC Generated Path)
9 File(s) found in NetDir, last date is 3/2/2006 6:52:02 PM
Checking FSPLANS Path (To Load/Save FS Flightplans)
OK - Read/Write access to FSPLANS Shared Folder
29 File(s) found in FSPLANS, last date is 3/2/2006 10:23:55 AM
last flight plan file is IFR Denver Intl to Rapid City Regl.PLN
Closing Everything
Project Magenta Revision: 12 March-08
13
OpenGL
We have chosen the OpenGL API (Graphics Programming Interface) over DirectX because we see it as "the
way to go" with precise high quality graphics. SGI's (Silicon Graphics) OpenGL has been the standard for
the high-end applications for many years now, and finally this cross-platform standard has found its way
onto our desktop PCs. Microsoft and SGI have formed an alliance to join their forces in a phased approach,
making OpenGL part of the Windows platform. Windows 98, Windows NT and XP have been delivered with
the OpenGL DLLs (Dynamic Link Libraries).
As the hardware is always ahead of the software (in this particular case the OpenGL drivers for your
graphics card) what you have on your PC isn't necessarily the newest implementation of the OpenGL ICD
Any PM program that requires OpenGL will initiate a benchmark cycle and report a benchmark value
(anything above the value of 200 is good, depending on your hardware and graphics card) as well as the
OpenGL acceleration status. This will happen when you first run the software – you can also turn this test
off via the user options discussed later.
This can be:
• Emulated, No OpenGL Acceleration
• Partial MCD acceleration
• Full ICD Acceleration
What you want is Full ICD Acceleration, and here is how you can get it, if the drivers allegedly support it
and the PFD doesn't report it. Some older TNT cards with only 16 or 32MB of memory don't have enough
memory and/or won't accelerate certain modes:
• Reduce the colour depth to 16 bit
• Reduce the resolution to 800x600
If the driver has an ICD driver for OpenGL, it should accelerate now. The next step would be to increase
the resolution. Please check the PFD.INI entry Quality= for ways of changing your display quality with
OpenGL and also these settings can be adjusted via the on screen menu (pressing ESC key) once the
software is up and running.
Project Magenta Revision: 12 March-08
14
Project Magenta Revision: 12 March-08
15
General – Common to all Software
The following section is relevant for the following software: Boeing Glass Cockpit, Airbus Glass Cockpit, RJ
Glass Cockpit, pmSystems, Instructor Station, GAIFR, QuickMap…
The CDU / MCDU and MCP type software are discussed at the end of this section
By its nature, the software is designed to be as versatile as possible. We cater for many different types of
application. For this reason, it is necessary to spend time familiarizing yourself with the basic concepts of
configuration. This section deals with the first level, getting started. From there on, much of the
customisazion techniques and options that are available to you will become self evident by
experimentation. To avoid confusion later, it is important to understand these basics first.
Whether you are running the demo software or the actual software for the first time this still applies. A
note about the demo software, it is the same as the actual software only that it is time limited. It can be
connected to MSFS but requires the same set-up and configuration as discussed previously.
Generally the software will go into a “demo” mode when it is not connected to anything (whether it is the
demo software or full version). It won’t revert to a demo mode if it is connected to MSFS. In demo mode,
the software will create an artificial situation, the instruments will appear as though they are flying, and
screen my change to show all the different modes. This is designed to give an overall impression for pure
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料13(4)