-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
3. On the portable data loader:
R - put the software standard
R application disk (5RB) into the
disk drive, the label in the
forward direction.
4. On the portable data loader:
-eject the disk from the disk drive.
5. On the portable data loader:
-put the standard application data base (AP) disk into the disk drive, the label in the forward direction.
On the MCDU:
-
the ACARS indication goes out of
view.On the portable data loader:
-
the READY indication is shown
-
then the WAIT RESPONSE indication is shown
-
then the TRANSF IN PROG indication is shown.
NOTE : If more than one disk is
____ necessary to upload a same type of data, the EJECT DISK and INSERT NEXT DISK indications are shown one after the other. They tell the operator that he must put a new disk into the portable data loader.
-when all the data are put into the computer, the TRANSF COMPLETE indication is shown.
On the portable data loader:
-
the < <MDDU READY> > indication isshown.
On the portable data loader:
-
the READY indication is shown
-
then the WAIT RESPONSE indication isshown
-
then the TRANSF IN PROG indication is shown.
NOTE : If more than one disk is
____ necessary to upload a same type of data, the EJECT DISK and INSERT NEXT DISK indications are shown one after the other. They tell the operator that he must put a new disk into the portable data loader.
R 1EFF : 001-049, 101-105, 1 23-24-00Page 303 1 1 Config-1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
6. On the portable data loader:
-eject the disk from the disk drive.
R
7. If the buzzer still operates, on the glareshield panel:
-push the MASTER CAUT light.
Subtask 23-24-00-280-053
-when all the data are put into the computer, the TRANSF COMPLETE indication is shown.
On the portable data loader:
-
the < <MDDU READY> > indication isshown.
On the MCDU:
-
the ACARS indication comes into view
-
the buzzer operates.
The buzzer stops.
B. Check on the MCDU of the Reference of the Data Loaded into the ACARS MU
(1)
Do the procedure to get access to the SYSTEM REPORT/TEST COM: RADIO page (Ref. TASK 31-32-00-860-003).
(2)
Check of the identification of the loaded disk(s)
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
Push the line key adjacent to the ACARS indication.
2.
Push the line key adjacent to the LRU IDENT indication.
3.
Push the MCDU MENU key.
4.
Push the line key adjacent to the ACARS indication.
The ACARS menu page comes into view.
The LRU IDENTIFICATION page comes intoview:
-make sure that the CORE SW P/N and the APP SW P/N references shown are the same as the CORE SW P/N and the APP SW P/N references read on the standard application disk (5RB).
The MCDU MENU page comes into view.
The ACARS PREFLT MENU 1/4 page comesinto view.
R 1EFF : 001-049, 101-105, 1 23-24-00Page 304 1 1 Config-1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
5.
Push the line key adjacent to the MISC indication.
6.
Push the line key adjacent to the MAINT indication.
7.
Push the line key adjacent to the PART NUMBERS indication.
5. Close-up
________ Subtask 23-24-00-860-063The ACARS MISC page comes into view.
The ACARS MAINTENANCE page comes intoview.
The ACARS PART NUMBERS page comes intoview.
-make sure that the DB P/N reference shown is the same as the DB reference read on the standard application data base (AP) disk.
A. Put the Aircraft back to its Initial Configuration
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊1(103)
