2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002  Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-003 Procedure to Get Access to the SYSTEM REPORT/TEST/COM Page
 3. Job Set-up
__________
 Subtask 23-12-00-860-052

 A. Aircraft Maintenance Configuration
 (1) Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
R (2) On the RMPs, set the ON/OFF switch to ON.
R  (3) On one MCDU, get the SYSTEM REPORT/TEST COM menu page (Ref. TASK 31-32-00-860-003).
 1EFF : ALL 1 23-12-00Page 505 1 1 Nov 01/03 1 1 1CES 1 Subtask 23-12-00-865-051

 B. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU COM/RMP/1 2RG1 G10 49VU COM/VHF/1 2RC1 G09 121VU COM NAV/VHF/3 2RC3 L05 121VU COM NAV/VHF/2 2RC2 L04 121VU COM NAV/RMP/3 2RG3 L03 121VU COM NAV/RMP/2 2RG2 L02
 4. Procedure
_________

R **ON A/C 001-049, 051-061, 101-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 23-12-00-740-050
 A. BITE Test of the VHF System
 NOTE : This test is for the system 1. For the other system(s), use the
____
 indications between the parentheses.

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the MCDU, on the COM menu
 page:

 -Push the line key adjacent to  - the VHF-1 (2, 3) page comes into the VHF1 (VHF2, VHF3) view. indication.
 2. On the VHF-1 (2, 3) page:
 -Push the line key adjacent to  - After some seconds the TEST OK the TEST indication. indication comes into view.
 3. On the MCDU:

 1EFF : ALL 1 23-12-00Page 506 1 1 Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
-On the MCDU, push the line key
 adjacent to the RETURN
 indication until the CFDS menu
 page comes into view.

R **ON A/C 062-099,
R Subtask 23-12-00-740-050-B
R A. BITE Test of the VHF System
R NOTE : This test is for the system 1. For the other system(s), use the
____ R indications between the parentheses.
R -------------------------------------------------------------------------------R ACTION RESULT R -------------------------------------------------------------------------------
R 1. On the MCDU, on the COM menu R page:
R - Push the line key adjacent to R the VHF1 (VHF2) indication.
R 2. On the VHF-1 (2) page:
R - Push the line key adjacent to R the TEST indication.
R 3. On the MCDU:
R - On the MCDU, push the line key R adjacent to the RETURN R indication until the CFDS menu R page comes into view.
-the VHF-1 (2) page comes into view.
-After some seconds the TEST OK indication comes into view.
1EFF : ALL 1 23-12-00Page 507 1 1 May 01/05 1 1 1CES 1R **ON A/C ALL

 5. Close-up
________
 Subtask 23-12-00-862-051

 A. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
 (1) On the RMPs, set the ON/OFF switch to OFF.
 1EFF : ALL 1 23-12-00Page 508 1 1 May 01/05 1 1 1CES 11EFF : ALL 1 23-12-11Page 401 1 1 Feb 01/05 1 1 1CES 1

 ANTENNA - VHF (4RC1,4RC2,4RC3) - REMOVAL/INSTALLATION_____________________________________________________
 TASK 23-12-11-000-001
 Removal of the VHF Antennas (4RC1) and (4RC2)
 WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE_______ YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT. 
R
 1. Reason for the Job__________________
 Self Explanatory
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R R  No specific No specific No specific FOR FIN 4RC1 No specific  blanking capscircuit breaker(s) safety clip(s) 1 SCRAPER - NON METALLIC1 ACCESS PLATFORM 6M (20 FT)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊1(75)