曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  Self Explanatory 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE  QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific  access platform 1.6 m (5 ft. 3 in.) 
R  B. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE  DESIGNATION 
R  -------------------------------------------------------------------------------
R  24-41-00-861-002  Energize the Aircraft Electrical Circuits from the 
R  External Power 
R  24-41-00-862-002  De-energize the Aircraft Electrical Circuits Supplied 
R  from the External Power 
R  52-41-00-410-002  Close the Avionics Compartment Doors after Access 
R  3. Job Set-up__________ 
R  Subtask 23-24-00-860-090 
R  A. Aircraft Maintenance Configuration 
R  (1) Energize the aircraft electrical circuits 
R  (Ref. TASK 24-41-00-861-002). 
R  (2) On the RMP 2, set the ON/OFF switch to ON.

 

R  Subtask 23-24-00-865-072 
R  B. Make sure that this(these) circuit breaker(s) is(are) closed: 
R  -------------------------------------------------------------------------------
R  PANEL  DESIGNATION  IDENT. LOCATION 
R  -------------------------------------------------------------------------------
R  49VU AUTO FLT/MCDU/1  11CA1  B01 
R  49VU SDAC/1/SPLY  3WV  F04 
R  49VU FWS/FWC1/SPLY  3WW  F01 
R  121VU CFDS/CFDIU/SPLY  2TW  J18 
R  121VU AIDS/DMU  4TV  K15 
R  121VU COM NAV/ACARS/MU  2RB  L06 
R  121VU COM NAV/VHF/3  2RC3  L05 
R  121VU COM NAV/RMP/2  2RG2  L02 
R  121VU AUTO FLT/MCDU/2  11CA2  N20 
R  121VU EIS/FWC2/SPLY  2WW  Q07 
R  Subtask 23-24-00-010-055 
R  C. Get Access 
R  (1) Put the access platform in position at the access door 824. 
R  (2) Open the access door 824. 
R  4. Procedure_________ 
R  **ON A/C 001-049, 101-105, 
R  Subtask 23-24-00-710-067-A 
R  A. Link Test of the ACARS 
R  -------------------------------------------------------------------------------
R  ACTION  RESULT 
R  -------------------------------------------------------------------------------

R  1. On the RMP2:  First configuration: 
R  - push the VHF3 pushbutton  - on the RMP2, the ACARS indication 
R  switch.  comes into view in the ACTIVE display 
R  - on the RMP2, a frequency comes into 
R  view in the STBY display. 
R  Second configuration : 
R  - on the RMP2, a frequency comes into 
R  view in the ACTIVE display

 

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
R 
R 
R  2. In the first configuration, go to 
R  step (3) to continue the test. 
R  In the second configuration, push 
R  the transfer pushbutton switch 
R  (double arrow) between the two 
R  windows on the RMP2. 
R 
R 
R 
R  3. On one MCDU: 
R  - adjust the brightness of the 
R  MCDU screen. 
R  4. On the MCDU keyboard : 
R  - push the MCDU MENU mode key 
R  5. On the MCDU: 
R  - push the line key adjacent to 
R  the ACARS indication. 
R  6. On the MCDU: 
R  - push the line key adjacent to 
R  the MISC indication. 
R  7. On the MCDU: 
R  - push the line key adjacent to 
R  the MAINT indication. 
R  8. On the MCDU: 
R  - push the line key adjacent to 
R  the TEST indication. 
R  9. On the MCDU: 
R  - push the line key adjacent to 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊1(110)