indication shows in the STBY display window.
On the RMPs: after not many seconds, the frequency (which was in the STBY display window of the RMP 1) shows in the ACTIVE display window and the ACARS indication shows in the STBY display window.
On the ACP 2:
-the VHF 3 reception pushbutton switch moves in then out to level above that of the unselected pushbutton switches.
On the RMP 1:
-the green LED on the VHF 1 pushbutton switch comes on.
On the RMP 1:
R 1EFF : 001-049, 101-105, 1 23-24-00Page 503 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
R - start this frequency. To do
R this, push the pushbutton
R switch (double arrow) between
R the two windows.
R 11. On the ACP 1:
R - push and release the VHF 1
R reception pushbutton switch.
R
R
R 12. On the ACP 1:
R - turn the VHF 1 reception
R pushbutton switch to the
R middle position.
R 13. On the CAPT LOUD SPEAKER control
R panel:
R - turn the LOUD SPEAKER
R potentiometer to the middle
R position.
R 14. On the ACP 1:
R - push the VHF 1 transmission
R pushbutton switch.
R
R 15. On the RMP 2:
R - push the transfer pushbutton
R switch (double arrow) between
R the two windows.
R
R
R
R
R 16. On the MCDU 2 keyboard:
R - push the MCDU MENU mode key.
R 17. On the MCDU 2:
R - push the line key adjacent to
R the CFDS indication.
-
the set frequency comes into view in the left window.
On the ACP 1:
-
the VHF 1 reception pushbutton switch moves in then out to a level above that of the unselected pushbutton switches.
On the ACP 1:
-
the green lines on the VHF 1 transmission pushbutton switch come on.
On the RMP 2:
-
the ACARS indication shows in the ACTIVE display window and the frequency (which was in the ACTIVE display window) shows in the STBY display window.
Now the ACARS MU controls the VHF 3 frequency.
On the MCDU 2:
-
the MCDU MENU page comes into view.
On the MCDU 2:
-
the MAINTENANCE MENU page comes into view.
R 1EFF : 001-049, 101-105, 1 23-24-00Page 504 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
R 18. On the MCDU 2:
R - push the line key adjacent to
R the SEND indication related to
R the Post FLIGHT REPORT (PFR).
R
R
R
R
R 19. On the MCDU 2:
R - push the line key adjacent to
R the PRINT indication for the
R PFR.
R
R 20. On the CAPT side stick
R controller:
R - push the PTT switch and tell
R the ground station to give the
R A/C identification.
R NOTE : The ground station finds____
R this data on the POST
R FLIGHT REPORT it
R received.
R 21. On the CAPT side stick
R controller:
R - release the PTT switch.
R
R 22. On the CAPT side stick
R controller:
R - push the PTT switch and tell
R the ground station to send a
R VOICE " GO AHEAD" message.
R 23. On the ECAM control panel:
R - Push the CLR key until the
R MEMO page comes into view on
R the lower ECAM DU (engine
R paramaters).
On the MCDU 2:
-the asterisk adjacent to the SEND indication goes out of view.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊1(105)
