(1)
 Remove the screws (6).

 (2)
 Remove the cover (7) to get access to the terminal block (5).

 NOTE : You must identify (also with the indications on the current
____ transformer) and disconnect only the cables which go through the current transformer.
 (3) Remove the nuts (1), the washers (2) and the cables (3) and (4) from the studs of the terminal block (5).
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 24-22-17Page 404 1201-228, 301-302, 1May 01/05 1 1 1CES 1

 AC Current Transformer - Block Diagram
 Figure 401/TASK 24-22-17-991-001

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 24-22-17Page 405 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1

R  AC Current Transformer - Block Diagram 
R  Figure 401A/TASK 24-22-17-991-001-A 
R 1EFF :  401-499,  1  24-22-17 Page 406 
1  1  Aug 01/05
 1  1
 1CES  1

 AC Current transformer (41XU1 and 41XU2) Figure 402/TASK 24-22-17-991-002 
R 1EFF : 1 1 1CES  ALL  1 111 24-22-17 Page 407 Aug 01/05

 (4)
 Disconnect the electrical connector (11) from the current transformer (10).

 (5)
 Put blanking caps on the disconnected electrical connector (11) and electrical receptacle (12).

 (6)
 Remove the screws (8) and the washers (9) from the current transformer (10).

 (7) Move the current transformer (10) along the cables to remove it. **ON A/C 001-049, 051-062, 101-105, 151-152, 201-205,
 Subtask 24-22-17-020-051
 B. Removal of the AC Current Transformer
 FOR 42XU1, 42XU2
 (Ref. Fig. 403/TASK 24-22-17-991-004)

 (1)
 Remove the nuts (8) and the washers (7) from the studs of the contactor (5).

 (2)
 Disconnect the bars (6) from the studs of the contactor (5).

 (3)
 Disconnect the electrical connector (4) from the current transformer (1).

 (4)
 Put blanking caps on the disconnected electrical connector (4) and electrical receptacle.

 (5)
 Remove the screws (3) and the washers (2) from the current transformer (1).

 (6) Remove the current transformer (1). Subtask 24-22-17-020-052
 C. Removal of the AC Current Transformer
 FOR 42XU3, 42XU4
 (Ref. Fig. 404/TASK 24-22-17-991-003)

 CAUTION : MAKE MATCH MARKS ON ALL THE ELECTRICAL WIRES BEFORE YOU
_______ DISCONNECT THEM. INCORRECT CONNECTION OF WIRES WILL CAUSE DAMAGE TO EQUIPMENT.
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 24-22-17Page 408 1201-228, 301-302, 1Aug 01/05 1 1 1CES 1

 AC Current Contactor (42XU1 and 42XU2)
 Figure 403/TASK 24-22-17-991-004

R 1EFF : 001-049, 051-062, 101-105, 151-152, 1 24-22-17Page 409 1201-205, 1Aug 01/05 1 1 1CES 1

 AC Current Contactor (42XU1 and 42XU2)
 Figure 403A/TASK 24-22-17-991-004-A

R 1EFF : 063-099, 106-149, 153-199, 206-299, 1 24-22-17Page 410 1301-399, 1Aug 01/05 1 1 1CES 1

 AC Current Transformer ( 42XU3 and 42XU4)
 Figure 404/TASK 24-22-17-991-003

 1EFF : 001-049, 051-062, 101-105, 151-152, 1 24-22-17Page 411 1201-205, 1Aug 01/05R 1 1 1CES 1

 (1)
 FOR 42XU3 In the rear panel 120VU, disconnect all the cables from the pin 2 of the circuit breakers connected to the AC BUS 1 busbar 1XP.

 (2)
 FOR 42XU4 In the rear panel 120VU, disconnect all the cables from the pin 2 of the circuit breakers connected to the AC BUS 2 busbar 2XP.

 (3)
 In the AC power center 123VU, disconnect all the cables from the pin 2 of the circuit breakers 11QA and 12QA.

 (4)
 Record the location and the color of the cables of each bundle which goes through the current transformer (1).

 (5)
 Remove the screws (12) and the washers (11) from the studs of the
 contactor (5).

 (6)
 Disconnect the cables (10) from the studs of the contactor (5).

 NOTE : You must identify (also with the indications on the current
____ transformer) and disconnect only the cables which go through the current transformer.
 (7)
 Remove the nuts (9) and the washers (8) from the studs of the
 contactor (5).

 (8)
 Disconnect the cables (6) and (7) from the studs of the contactor
 (5).

 (9)
 Disconnect the electrical connector (4) from the current transformer (1).
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM ELECTRICAL POWER 電源1(114)