R 1EFF : 401-499, 1 24-21-51Page 431 1 1 Aug 01/05 1 1 1CES 1R B. Consumable Materials

R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R  Material No.  CP8002  * 
R  Lockwire CRS 0.032in. (0.8mm) dia (Ref. 70-30-00) 
R  Material No. 03-002  GB DEF-STAN 91-101 
R  LUBRICATING OIL TURBINE ENGINE SYNT BASE 
R  (Ref. 20-31-00) 
R  Material No. 11-002  USA MIL-PRF-680 
R  DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT) 
R  (Ref. 20-31-00) 

R C. Expendable Parts
R -------------------------------------------------------------------------------R FIG.ITEM |DESIGNATION |IPC-CSN R -------------------------------------------------------------------------------
R  2  packing 
R  5  packing 
R  15  packing 
R  17  packing 
R  42  O-ring 
R  44  O-ring 
R  D. Referenced Information 

24-21-51 05 -030 24-21-51 05 -060 24-21-51 05 -080 24-21-51 05 -100 24-21-51 02D-090 24-21-51 02D-010
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R  12-13-24-612-041 
R 
R  24-21-00-710-040 
R 
R  24-21-41-000-040 
R 
R  24-21-51-000-040 
R 
R  71-13-00-010-040 
R  71-13-00-410-040 
R  24-21-51-991-305 
R  24-21-51-991-306 
R  24-21-51-991-307 

IDG Servicing - Filling of the IDG with Oil or Addition of Oil after a Level Check Operational Test of the IDG Disconnect and Reconnect (Reset) Function - Engine Static Removal of the Quick Attach/Detach (QAD) Adapter of the IDG (4000XU) Removal of the Integrated Drive Generator -IDG 1(2),(4000XU) Opening of the Fan Cowl Doors Closing of the Fan Cowl Doors Fig. 402 Fig. 404 Fig. 407

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
R  24-21-51-991-308 Fig. 408 
R  3. Job Set-up__________ 
R  Subtask 24-21-51-860-057 
R  A. Aircraft Maintenance Configuration 
R  (1) On the center pedestal, on the ENG panel 115VU, make sure that a 
R  warning notice is in position to tell persons not to start the 
R  engine. 
R  (2) On the overhead maintenance panel 50VU, make sure that the ON legend 
R  of the ENG/FADEC GND PWR/1(2) pushbutton switch is off. Make sure 
R  that a warning notice is in position to tell persons not to energize 
R  the FADEC 1(2). 
R  Subtask 24-21-51-865-061 
R  B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and 
R  tagged 
R  -------------------------------------------------------------------------------
R  PANEL DESIGNATION IDENT. LOCATION 
R  -------------------------------------------------------------------------------
R  FOR 1000EM1, 4000XU 
R  122VU ELEC/GCU/1 2XU1 T26 
R  122VU ELEC/IDG1/DISC 1XT T24 
R  FOR 1000EM2, 4000XU 
R  122VU ELEC/GCU/2 2XU2 T27 
R  122VU ELEC/IDG2/DISC 2XT T25 
R  Subtask 24-21-51-010-062 
R  C. Make sure that the fan cowl doors are open (Ref. TASK 71-13-00-010-040): 
R  - FOR 1000EM1 
R  437AL, 438AR 
R  - FOR 1000EM2 
R  447AL, 448AR

R  4. Procedure_________ 
R  (Ref. Fig. 402/TASK 24-21-51-991-305) 
R  WARNING : WEAR GOGGLES WHEN YOU REMOVE OR INSTALL THE LOCKWIRE. CUT, REMOVE_______ 
R  AND DISCARD THE LOCKWIRE AS YOU DO THE TASK. LOOSE LOCKWIRE CAN 
R  CUT OR BLIND YOU. 
R  Subtask 24-21-51-640-063 
R  A. Lubrication of the Consumable Materials and QAD Adapter 
R  (1) Lubricate the QAD adapter ring threads, lugs and the tension bolt 
R  (43) with the OILS (Material No. 03-002). 
R  (2) Lubricate the new O-ring (42) and O-ring (44) with the OILS (Material 
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM ELECTRICAL POWER 電源1(88)