R IDG System - QAD Adapter
R Figure 604/TASK 24-21-00-991-912
1EFF : 401-499, 1 24-21-00 Page 623
1 1 Aug 01/05
1 1
1CES 1
R IDG System - QAD Adapter Wear Allowance (P/N 772896) R Figure 605/TASK 24-21-00-991-913
1EFF : 401-499, 1 24-21-00Page 624 1 1 Aug 01/05 1 1 1CES 1
R Subtask 24-21-00-420-079
R D. Safety the tension bolt (2) with lockwire.
R 5. Close-up________
R Subtask 24-21-00-410-082
R A. Close Access
R (1) Make sure that the work area is clean and clear of tool(s) and other
R items.
R (2) Close the right fan cowl door (Ref. TASK 71-13-00-410-040):
R - FOR 1000EM1
R 438AR
R - FOR 1000EM2
R 448AR
R (3) Remove the warning notice(s).
R **ON A/C ALL
TASK 24-21-00-210-044
Inspection of the Filter Element(s)
WARNING : BE CAREFUL WHEN YOU WORK ON THE ENGINE COMPONENTS IMMEDIATELY AFTER
_______ THE ENGINE IS SHUTDOWN. THE ENGINE COMPONENTS CAN STAY HOT FOR UP TO ONE HOUR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific warning notice
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
12-32-24-281-001 Sampling of the IDG Oil for Analysis 24-21-00-612-043 Servicing of the IDG after Oil Chemical Contamination 24-21-00-920-040 Drain IDG Oil System, Discard Filter Element(s) and
Replenish 24-21-49-000-003 Removal of the IDG Cooling Oil-in Tubes and Hoses 24-21-49-000-004 Removal of the IDG Cooling Oil-out Tubes and Hoses 24-21-49-400-003 Installation of the IDG Cooling Oil-in Tubes and
Hoses 24-21-49-400-004 Installation of the IDG Cooling Oil-out tubes and Hoses 24-21-51-000-040 Removal of the Integrated Drive Generator -IDG
1(2),(4000XU)
R 24-21-51-000-040 Removal of the Integrated Drive Generator -IDG
R 1(2),(4000XU) 24-21-51-000-041 Removal of the IDG Oil Filter(s)
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R R 24-21-51-400-040 24-21-51-400-040 24-21-51-400-040 71-13-00-010-040 71-13-00-410-040 73-11-60-000-002 73-11-60-400-002 TSM 24-OBSV PB 101 Installation of the Integrated Drive Generator -IDG 1(2),(4000XU) Installation of the Integrated Drive Generator -IDG 1(2),(4000XU) Installation of the Integrated Drive Generator - IDG 1(2), (4000XU) (New EPGS)Opening of the Fan Cowl DoorsClosing of the Fan Cowl DoorsRemoval of the Integrated Drive Generator (IDG) Oil Cooler AssemblyInstallation of the Integrated Drive Generator (IDG) Oil Cooler Assembly(for corrective action)
3. Job Set-up__________
Subtask 24-21-00-941-057
A. Safety Precautions
(1) On the center pedestal, on the ENG panel 115VU:
(a) Put a warning notice in position to tell persons not to start the engine.
(2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.
(3) On the overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b) Put a warning notice in position to tell persons not to energize the FADEC 1(2).
Subtask 24-21-00-010-054
B. Open the right fan-cowl door (Ref. TASK 71-13-00-010-040): - FOR 1000EM1 438AR - FOR 1000EM2 448AR
4. Procedure
_________
Subtask 24-21-00-020-050
A. Remove the IDG Oil Filter(s) (Ref. TASK 24-21-00-920-040)
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
Subtask 24-21-00-210-064
B. Visual Inspection of the Filter Element
(1)
If you smell a fuel odour from the filter element or filter cover, do the servicing of the IDG after oil chemical contamination (Ref. TASK 24-21-00-612-043).
(2)
If you think that the condition of the oil in the filter element or on the filter cover is not correct, do a sampling of the IDG oil for analysis (Ref. TASK 12-32-24-281-001).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM ELECTRICAL POWER 電源1(68)
