-
if the oil level is at or near the top of the green band, oil servicing is not necessary,

 -
if the oil level is below the green band, do the steps 4.A.,

 4.H. and 4.J. again,

 -
if the oil level is above the green band, do the steps 4.A. and

 4.J. again.
 (2) Inspection of the oil level after an engine start (alternative procedure).
 (a)
 Let the oil in the IDG become stable for 5 minutes.

 (b)
 Look at the oil level sight-glass of the IDG:

 -
if the oil level is in the green or yellow band, oil servicing is not necessary,

 -
if the oil level is below the green band, do the steps 4.A.,

 4.H. and 4.J. again,
 1EFF : ALL 1 24-21-00Page 315 1 1 Aug 01/05R 1 1 1CES 1

 -if the oil level is above the yellow band, do the steps 4.A. and 4.J. again. ________
5. Close-up
 Subtask 24-21-00-410-072
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Make the thrust reverser serviceable (Ref. TASK 78-30-00-081-041).

 (3)
 Close the fan cowl doors (Ref. TASK 71-13-00-410-040):

 -
FOR 1000EM1
 437AL, 438AR

 -
FOR 1000EM2
 447AL, 448AR

 (4) Remove the warning notice(s). Subtask 24-21-00-862-053
 B. De-energize the ground service network
 (Ref. TASK 24-42-00-862-001).

 1EFF : ALL 1 24-21-00Page 316 1 1 Aug 01/05R 1 1 1CES 1

 TASK 24-21-00-612-043 Servicing of the IDG after Oil Chemical Contamination WARNING : BE CAREFUL WHEN YOU WORK ON THE ENGINE COMPONENTS IMMEDIATELY AFTER
_______ THE ENGINE IS SHUTDOWN. THE ENGINE COMPONENTS CAN STAY HOT FOR UP TO ONE HOUR.
 WARNING : WEAR GOGGLES, INSULATED GLOVES AND OTHER PROTECTIVE CLOTHES.
_______ HOT OIL CAN BURN YOUR EYES AND SKIN. IF OIL TOUCHES YOUR EYES OR SKIN, GET MEDICAL AID.
 CAUTION : DO NOT OPERATE THE IDG:
_______
 -
IF IT CONTAINS TOO MUCH OIL

 -
IF IT DOES NOT CONTAIN ENOUGH OIL
 IF YOU DO, YOU CAN CAUSE DAMAGE TO THE IDG.

 CAUTION : USE ONLY NEW CANS OF OIL WHEN YOU FILL THE IDG WITH OIL OR ADD OIL TO
_______ THE IDG. THE CONTAMINATION IN OIL THAT STAYS IN OPEN CANS CAN CAUSE FAST DETERIORATION OF THE OIL AND WILL DECREASE THE LIFE OF THE IDG.
 CAUTION : DO NOT USE SOLVENTS THAT CONTAIN CHLORINE TO CLEAN THE EQUIPMENT
_______ (PUMP, HOSES, TANK AND FUNNEL) USED TO FILL THE IDG WITH OIL. CHLORINE CONTAMINATION OF THE OIL CAN CAUSE FAST DETERIORATION OF THE OIL AND WILL DECREASE THE LIFE OF THE IDG.
 CAUTION : DO NOT DO THE SERVICING OF A DISCONNECTED IDG. CONTINUED OPERATION OF
_______ A DEFECTIVE IDG CAN CAUSE DAMAGE.
 1. Reason for the Job
__________________
 You must do this procedure to clean the IDG and the external lines.

 1EFF : ALL 1 24-21-00Page 317 1 1 Aug 01/05R 1 1 1CES 1

 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific container 5.7 l (1.5 USgal)
 No specific overflow drain hose
 No specific warning notice
 No specific Torque Wrench : range 36.00 to 220.00 lbf.in

 (0.40 to 2.60 m.daN)
 DH13PM 1 TANK - ENGINE OIL FILLING UP

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. CP8001 * lockwire 0.032 in. (0.80 mm) dia. (Ref. 70-30-00) Material No. CP8002 * lockwire 0.032 in. (0.80 mm) dia. (Ref. 70-30-00)
 Material No. 03-002  GB DEF-STAN 91-101
 LUBRICATING OIL TURBINE ENGINE SYNT BASE
 (Ref. 20-31-00)

 C. Expendable Parts
 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
2 packing 24-21-51 02 -020 2 packing 24-21-51 02A-020 R 2 packing 24-21-51 02D-020

 D. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
12-13-24-612-041  IDG Servicing - Filling of the IDG with Oil or Addition of Oil after a Level Check
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM ELECTRICAL POWER 電源1(51)