曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 A. If the BITE test gives the maintenance message ATC CTL PNL (3SH) / ATC1(1SH1) or ATC CTL PNL (3SH) / ATC2(1SH2)
 - replace the CTL UNIT-ATC/TCAS (3SH) (Ref. AMM TASK 34-52-12-000-001) and (Ref. AMM TASK 34-52-12-400-001).
 **ON A/C ALL
 B. Do the test given in para. 3.
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-52-00∞∞∞∞∞∞∞∞∞∞Page 248
 Aug 01/05 CES

 TASK 34-52-00-810-839
 Loss of Mode S Communication between ATC1 and Ground Station
 1. Possible Causes_______________
 2. Job Set-up Information______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R  AMM AMM AMM AMM  34-52-00-720-005 34-52-00-720-005 34-52-00-720-005 34-52-00-740-004  Functional Test of the ATC/Mode S Transponder Functional Test of the ATC/Mode S Transponder Functional Test of the ATC/Mode S Transponder BITE Test of the ATC
 3. Fault Confirmation__________________
 A. First Step: - do the BITE test of the ATC1 (Ref. AMM TASK 34-52-00-740-004).
R R  B. Second Step: - do the functional test of ATC MODE S (Ref. AMM TASK 34-52-00-720-005) or (Ref. AMM TASK 34-52-00-720-005) or (Ref. AMM TASK 34-52-00-720-005).
 4. Fault Isolation_______________
R R  A. If the BITE test gives a maintenance message: - Do the trouble shooting procedure related to the maintenance message. 
B. If the BITE test is OK and the functional test is not OK: - do the trouble shooting procedure related to the test results.
 C. If the two tests are OK: - no maintenance action is necessary.

 

 TASK 34-52-00-810-840
 Loss of Mode S Communication between ATC2 and Ground Station
 1. Possible Causes_______________
 2. Job Set-up Information______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R  AMM AMM AMM AMM  34-52-00-720-005 34-52-00-720-005 34-52-00-720-005 34-52-00-740-004  Functional Test of the ATC/Mode S TransponderFunctional Test of the ATC/Mode S Transponder Functional Test of the ATC/Mode S TransponderBITE Test of the ATC
 3. Fault Confirmation__________________
 A. First Step: - do the BITE test of the ATC2 (Ref. AMM TASK 34-52-00-740-004).
R R  B. Second Step: - do the functional test of ATC MODE S (Ref. AMM TASK 34-52-00-720-005) or (Ref. AMM TASK 34-52-00-720-005) or (Ref. AMM TASK 34-52-00-720-005).
 4. Fault Isolation_______________
R R  A. If the BITE test gives a maintenance message: - Do the trouble shooting procedure related to the maintenance message. 
B. If the BITE test is OK and the functional test is not OK: - do the trouble shooting procedure related to the test results.
 C. If the two tests are OK: - no maintenance action is necessary.

 

 ADF - FAULT ISOLATION PROCEDURES
________________________________
 TASK 34-53-00-810-801
 Failure of the ADF Receiver 1
 1. Possible Causes
_______________
 - RECEIVER-ADF, 1 (2RP1)

 - ANTENNA-ADF LOOP AND SENSE, 1 (3RP1)

 - wiring from the ADF antenna 1 (3RP1) to the ADF receiver 1 (2RP1) R - short to ground at the wiring between the circuit breaker (1RP1) and the R ADF receiver 1 (2RP1)
 - C/B-NAV/ADF/1 (1RP1)
 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 34-53-00-740-003 BITE Test of the ADF
 AMM 34-53-11-000-001 Removal of the ADF Loop and Sense Antenna
 AMM 34-53-11-400-001 Installation of the ADF Loop and Sense Antenna
 AMM 34-53-31-000-002 Removal of the ADF Receiver (2RP1, 2RP2)
 AMM 34-53-31-400-002 Installation of the ADF Receiver (2RP1, 2RP2)
 ASM 34-53/01

 3. Fault Confirmation
__________________
 A. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU NAV/ADF/1 1RP1 H14
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 導航 NAVIGATION 3(122)