- wiring of the BEARING OUTPUT 2 bus from the ADF receiver 1 (2RP1) to the first terminal block

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
AMM 31-60-00-740-002 EIS Input Test
 AMM 31-60-00-740-007 GROUND SCANNING Test of the DMC
 AMM 34-53-31-000-002 Removal of the ADF Receiver (2RP1, 2RP2)
 AMM 34-53-31-400-002 Installation of the ADF Receiver (2RP1, 2RP2)
 ASM 34-53/01

 3. Fault Confirmation
__________________
 A. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU NAV/ADF/1 1RP1 H14
 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
 B. Test
 (1) Do the EIS input test (Ref. AMM TASK 31-60-00-740-002). R **ON A/C 106-149, 303-399, 401-499,
 B. Test
 (1) Do the Ground Scanning Test of the DMC (Ref. AMM TASK 31-60-00-740-007).

 4. Fault Isolation
_______________
 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299, 301-302,
 A. If the test gives the maintenance message DMC3: NO ADF1 DATA:
 - replace the RECEIVER-ADF, 1 (2RP1) (Ref. AMM TASK 34-53-31-000-002) and (Ref. AMM TASK 34-53-31-400-002).
 (1) If the fault continues:
 - do a check and repair the wiring of the BEARING OUTPUT 2 bus from the ADF receiver 1 (2RP1) to the first terminal block (Ref. ASM 34-53/01).
R **ON A/C 106-149, 303-399, 401-499,
 A. If the test gives the maintenance message DMC3: ADF1(2RP1)/DMC3(1WT3)
 - replace the RECEIVER-ADF, 1 (2RP1) (Ref. AMM TASK 34-53-31-000-002) and (Ref. AMM TASK 34-53-31-400-002).
 (1) If the fault continues:
 - do a check and repair the wiring of the BEARING OUTPUT 2 bus from the ADF receiver 1 (2RP1) to the first terminal block (Ref. ASM 34-53/01).
 **ON A/C ALL
 B. Do the test given in Para. 3.B.

 Loss of the ADF1 Data Bus Identified by the CFDS
 1. Possible Causes
_______________
 - RECEIVER-ADF, 1 (2RP1)

 - wiring of the BEARING OUTPUT 2 bus from the ADF receiver 1 (2RP1) to the first terminal block

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 31-32-00-869-002 Procedure for Class 3 Faults Reading
 AMM 34-53-31-000-002 Removal of the ADF Receiver (2RP1, 2RP2)
 AMM 34-53-31-400-002 Installation of the ADF Receiver (2RP1, 2RP2)
 ASM 34-53/01

 3. Fault Confirmation
__________________
 A. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU NAV/ADF/1 1RP1 H14
 B. Test On the CFDS MENU page, get access to the AVIONICS STATUS page (Ref. AMM TASK 31-32-00-869-002).
 4. Fault Isolation
_______________
 A. If the test gives the maintenance message NO ADF1 DATA:
 - replace the RECEIVER-ADF, 1 (2RP1) (Ref. AMM TASK 34-53-31-000-002) and (Ref. AMM TASK 34-53-31-400-002).
 (1) If the fault continues:
 - do a check and repair the wiring of the BEARING OUTPUT 2 bus from the ADF receiver 1 (2RP1) to the first terminal block (Ref. ASM 34-53/01).
 B. Do the test given in Para. 3.B.
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-53-00∞∞∞∞∞∞∞∞∞∞Page 215
 May 01/05R CES

 TASK 34-53-00-810-807
 Loss of the ADF 2 Data Bus Identified by the EIS 1

 1. Possible Causes
_______________
 - RECEIVER-ADF, 2 (2RP2)

 - wiring of the BEARING OUTPUT 2 bus from the ADF receiver 2 (2RP2) to the first terminal block

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊(cè) 導(dǎo)航 NAVIGATION 3(126)