(a)  
Push each down button.

 (b)  
Make sure that each display shows TOGA NO PUSH.

 (c)  
Push and hold one of the two TOGA buttons on the thrust levers.

 (d)  
Check that each display reads TOGA PUSHED.

 (e)  
Release the TOGA switch.

 S 745-074-002
 (5)  
Do a check of the landing gear inputs to the SMC:

 (a)  
Push each down button.

 (b)  
Make sure that each display shows NLG SQT GND.

 (c)  
Open the LANDING GEAR NOSE STEER AND AIR/GND circuit breaker on the P6-2 panel.

 (d)  
Make sure that each display shows NLG SQT AIR.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH STALL MANAGEMENT ú

 27-32-00
 COMPUTER P/N 65-52822  ú CONFIG 2 ú 17 Page 505 ú Nov 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (e)  
Close the LANDING GEAR NOSE STEER AND AIR/GND circuit breaker on the P6-2 panel.

 (f)  
Push each down button.

 (g)  
Make sure that each display shows AIR/GND GND.

 (h)  
Push and hold the GND SENSING test switch on the E-11 landing gear logic shelf.

 (i)  
Make sure that each display shows AIR/GND AIR.

 (j)  
Release the GND SENSING test switch.

 (k)  
Make sure that each display shows AIR/GND GND.

 (l)  
Push and hold the AIR SENSING test switch on the E-11 shelf.

 (m)  
Make sure that each display shows AIR/GND AIR.

 (n)  
Release the AIR SENSING test switch.

 (o)  
Make sure that each display shows AIR/GND GND.

 (p)  
Push the down button.

 (q)  
Make sure that each display shows MLG DOWN.

 (r)  
Open the AIR/GND RELAY & LIGHTS circuit breaker on the P6-3 panel.

 (s)  
Make sure that each display shows MLG DOWN NOT DOWN.

 (t)  
Close the AIR/GND RELAY & LIGHTS circuit breaker on the P6-3 panel.

 S 745-001-002
 (6)  
Do a check of the dc power to the landing gear bypass valve:

 (a)  
Push each down button.

 (b)  
Make sure that each display shows LGBV1DC MISSING.

 (c)  
Open the LANDING GEAR NOSE STEER AND AIR/GND circuit breaker on the P6-2 panel.

 (d)  
Make sure that each display shows LGBV1DC PRESENT.

 (e)  
Close the LANDING GEAR NOSE STEER AND AIR/GND circuit breaker on the P6-2 panel.

 S 745-075-002
 (7)  
Do a check of the autoslat power input to the SMC:

 (a)  
Push each down button. Check that each display reads A/S DC PRESENT.

 (b)  
Make sure that each display shows A/S DC PRESENT.

 (c)  
Open these circuit breakers on the P6-2 panel: 1) AUTOSLAT DC 1 2) AUTOSLAT DC 2

 (d)  
Make sure that each display reads A/S DC MISSING.

 (e)  
Close these circuit breakers on the P6-2 panel: 1) AUTOSLAT DC 1 2) AUTOSLAT DC 2

 I.
SMC ARINC Inputs Test

 S 745-076-002
 (1)  
Do a check of the DADC input to the SMC:

 (a)  
Push the MENU button on the SMC maintenance control panel on the front of each SMC.

 (b)  
Make sure that each display shows DISCRETE INPUTS?.

 (c)  
Push each NO button.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH STALL MANAGEMENT ú

 27-32-00
 COMPUTER P/N 65-52822  ú CONFIG 2 ú 08 Page 506 ú Nov 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (d)  
Make sure that each display shows ARINC TESTS?.

 (e)  
Push each YES button.

 (f)  
Make sure that each display shows DADC ACTIVE.

 (g)  
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 3(52)