737-300/400/500
MAINTENANCE MANUAL
Nose Gear Lock Mechanism Wear Limits
Figure 601 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-33-51
ALL ú ú 01 Page 604 ú Mar 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
, USE 69-41250-1 SHIM
8
THE TOTAL DIAMETRAL CLEARANCE BETWEEN THE BEARING RACE, BEARING BALL, AND PIN MUST NOT BE GREATER THAN THE SPECIFIED MAX. DIA CLEARANCE.
Nose Gear Lock Mechanism Wear Limits
Figure 601 (Sheet 4)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-33-51
ALL ú ú 01.1 Page 605 ú Jul 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
E26979
A
737-300/400/500MAINTENANCE MANUAL
NOSE GEAR BUNGEE SPRING - REMOVAL/INSTALLATION
______________________________________________
TASK 32-33-52-004-001
1. Nose Gear Bungee Spring Removal (Fig 401)
_______________________________
A. Equipment
(1)
Ground Lock Assemblies (Ref 32-00-01)
B.
Prepare for the procedure.
S 864-002
(1)
Make sure that you install the ground lock assemblies in the main and the nose gears (Ref 32-00-01).
C.
Procedure
S 024-009
(1)
Remove the nut and washer from end of the lock brace shaft (19).
(a)
Extend the spring.
NOTE: Move the end of the spring off the lock brace shaft
____
(19).
(b)
Remove the nut (7) and washer from the spring retainer bolt.
(c)
Remove the spring.
(d)
Place the nut (7) on the spring retainer bolt.
NOTE: Tighten the bolt with your hand.
____
TASK 32-33-52-404-004
2. Nose Gear Bungee Spring Installation (Fig. 401)
____________________________________
A. Procedure
S 424-006
(1)
Install the bungee spring.
(a)
Remove the nut (7) from the spring retainer bolt.
(b)
Put the spring on the spring retainer bolt.
NOTE: Add the washer and the nut (7).
____
(c) Tighten the nut with your hand.
NOTE: Lock the nut with the cotter pin.
____
(d)
Extend the spring.
(e)
Move the connection above each end of the lock spring shaft (19).
(f)
Add the washer and the nut.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-33-52
ALL ú ú 01 Page 401 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
SEE A
SEE B
20. FITTING
19. SHAFT
17. BOLT
5. SPRING 16. LOCK
ACTUATOR
18. UPPER
ATTACHMENT
BOLT
3. LOCK
BRACE
1. SPRING
FWD
A
Nose Gear Lock Mechanism Installation
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-33-52
ALL ú ú 01 Page 402 ú Nov 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
C96240
A
737-300/400/500MAINTENANCE MANUAL
SHIM
SPRING RETAINER BOLT 7. NUT SHIM
7. NUT 1. SPRING
6. LOCK LINK
21. LOCK SENSOR TARGET
2. INDICATORS
1
5. SPRING 3. LOCK BRACE
4. BOLT
FWD
B
SHIM
7. NUT
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機(jī)維護(hù)手冊 起落架 LANDING GEAR 2(122)
