EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-31-31
ALL ú ú 01 Page 402 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 034-010
(8)
Disconnect the electrical leads from the lock solenoid coil.
S 034-011
(9)
Remove the screws for the lock solenoid coil.
S 034-029
(10)
Remove the slug from the lock solenoid coil.
TASK 32-31-31-424-034
3. Lock Solenoid Installation (Fig. 401)__________________________
A. Access
(1)
Location Zone
101,102 Control Cabin
B.
Installation
S 434-013
(1)
Put the lock solenoid coil around the slug and install the screws.
S 434-014
(2)
Connect the electrical leads to the lock solenoid coil.
S 434-015
(3)
Put the baseplate assembly in the correct position and connect the electrical connector to the baseplate assembly.
S 434-017
(4)
Install the screws for the baseplate assembly.
(5)
Connect external electrical power to the airplane.
S 864-035
(6)
Remove the DO-NOT-CLOSE tags and close these circuit breakers:
(a)
P6 Main Power Distribution Panel
1) LEVER LATCH & PRESS WARN
S 864-019
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-31-31
ALL ú ú 03 Page 403 ú Mar 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 864-020
(7) Release the pressure from the hydraulic system.
S 714-021
(8) Try to move the control lever for the landing gear to UP.
NOTE:____ Make sure you cannot move the control lever to UP.
S 714-022
(9)
Pull the lock override trigger and make sure you can move the control lever for the landing gear to UP.
S 864-031
(10)
Move the control lever for the landing gear to OFF.
S 034-023
(11)
Disconnect the teleflex cable on the torsion link of the right main landing gear.
S 864-024
(12)
Move the actuator of the air safety sensor for the landing gear in front of the sensor.
NOTE: This energizes the air safety sensor.
____
S 714-025
(13)
Make sure you can move the control lever for the landing gear to all three positions.
S 864-032
(14)
Move the control lever for the landing gear to DN.
S 414-026
(15)
Close and lock the P2 and P3 panels.
S 434-027
(16)
Connect the teleflex cable to the torsion link of the right main landing gear.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-31-31
ALL ú ú 01 Page 404 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
LANDING GEAR CONTROL CABLES - REMOVAL/INSTALLATION
__________________________________________________
1. General_______
A. You must remove the control lever assembly to remove the forward parts of the control cables. You must remove the antiskid switch cam from cable C before you can remove the cables (Ref 32-31-11/401).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 起落架 LANDING GEAR 2(53)
