27-41-00
 ALL  ú ú 01 Page 506 ú Oct 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
E55857
A
747-400 MAINTENANCE MANUAL
 (b)  
Hold the STAB TRIM ALTN switches on the control stand to APL NOSE UP. 1) Make sure the stabilizer position indicators on the control

 stand move to APL NOSE UP. 2) Release the STAB TRIM ALTN switches.

 (c)  
Hold the STAB TRIM ALTN switches to APL NOSE DN. 1) Make sure the stabilizer position indicators move to APL

 NOSE DN. 2) Release the STAB TRIM ALTN switches.

 (d)  
Set the STAB TRIM 2 switch to ON and the STAB TRIM 3 switch to CUTOUT.

 (e)  
Hold the STAB TRIM ALTN switches to APL NOSE UP. 1) Make sure the stabilizer trim position indicators move to

 APL NOSE UP. 2) Release the STAB TRIM ALTN switches.

 (f)  
Hold the STAB TRIM ALTN switches to APL NOSE DN. 1) Make sure the stabilizer trim position indicators move to

 APL NOSE DN. 2) Release the STAB TRIM ALTN switches.

 (g)  
Set the STAB TRIM 2 and 3 switches to AUTO.

 S 865-059
 (4)  
If the hydraulic power is not necessary, do this task: "Remove Hydraulic Power" (AMM 29-11-00/201).

 S 865-061

 (5)  
If the electrical power is not necessary, do this task: "Remove Electrical Power" (AMM 24-22-00/201).

 TASK 27-41-00-715-088
 5.  Operational Test - Manual/Electric Stabilizer Trim Switches___________________________________________________________
 A. References
 (1)  
AMM 24-22-00/201, Manual Control

 (2)  
AMM 29-11-00/201, Main Hydraulic Supply System

 B.
Access

 (1)  
Location Zone
 221 Control Cabin, LH
 222 Control Cabin, RH

 C.
Procedure

 (1)
Do this task: "Supply Electrical Power" (AMM 24-22-00/201).

 S 865-093
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-41-00
 ALL  ú ú 01 Page 507 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 S 865-094

 WARNING:_______ MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
 SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER.  AILERONS, RUDDERS,
 ELEVATORS, FLAPS, SPOILERS, LANDING GEAR, AND THRUST REVERSERS
 CAN MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER.  THIS CAN

 CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
 (2)  
Do this task to pressurize the hydraulic systems No. 2 and No. 3: "Supply Hydraulic Power" (AMM 29-11-00/201).

 S 715-074

 (3)  
Do this test of the manual/electric stabilizer trim switches:

 (a)  
Set the STAB TRIM 2 switch to ON and the STAB TRIM 3 switch to CUTOUT.

 (b)  
Hold the STAB TRIM switches on the captain's control wheel to NOSE UP. 1) Make sure the stabilizer position indicators on the control

 stand move to APL NOSE UP. 2) Release the STAB TRIM switches.

 (c)  
Hold the STAB TRIM switches on the captain's control wheel to NOSE DN. 1) Make sure the stabilizer position indicators move to APL

 NOSE DN. 2) Release the STAB TRIM switches.

 (d)  
Set the STAB TRIM 2 switch to CUTOUT and the STAB TRIM 3 switch to ON.

 (e)  
Hold the STAB TRIM switches on the first officer's control wheel to NOSE UP. 1) Make sure the stabilizer position indicators move to APL

 NOSE UP. 2) Release the STAB TRIM switches.

 (f)  
Hold the STAB TRIM switches on the first officer's control wheel to NOSE DN. 1) Make sure the stabilizer position indicators move to APL

 NOSE DN. 2) Release the STAB TRIM switches.

 (g)  
Set the STAB TRIM 2 and 3 switches to AUTO. 1) Make sure that there are no remaining messages.

 S 865-067
 (4)  
If the hydraulic power is not necessary, do this task: "Remove Hydraulic Power" (AMM 29-11-00/201).

 S 865-068

 (5)  
If the electrical power is not necessary, do this task: "Remove Electrical Power" (AMM 24-22-00/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 3(130)