(2)  
Access Panel 334HBL Inboard Elevator Actuator Access Panel 344HBR Inboard Elevator Actuator Access Panel 334LBL Horizontal Stab. Trailing Edge Access Panel 344LBR Horizontal Stab. Trailing Edge Access Panel

 D.
Prepare for Removal

 (1)
Apply external power to the AC buses (AMM 24-22-00/201).

 S 864-029

 (2)  
Set all FLT CONTROL HYD POWER TAIL switches on the P461 Pilots' Overhead Maintenance Panel in SHUTOFF.

 (3)  
Set the STAB TRIM 2 and 3 switches on the control stand to CUTOUT.

 S 864-028
 S 864-031
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-31-03
 ALL  ú ú 02 Page 408 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 S 864-032
 (4)  
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
P180, DC Power Distribution Panel
 1) 180H8, ELEV/RUD VLV SYS 1
 2) 180E7, ELEV/RUD VLV SYS 2
 3) 180H23, ELEV/RUD VLV SYS 3
 4) 180E22, ELEV/RUD VLV SYS 4

 (b)  
P7, Overhead Circuit Breaker Panel
 1) 7E7, L STAB TRIM S/O VLV
 2) 7E20, R STAB TRIM S/O VLV

 S 864-033
 (5)  
Remove external power from the AC buses if it is not necessary (AMM 24-22-00/201).

 S 864-034

 (6)  
Manually move the elevator to the full up position.

 S 864-059

 (7)  
For the inboard elevator; Move the control column to follow the elevator movement.

 S 864-060

 (8)  
For the outboard elevator; Move the outboard elevator PCP summing lever to follow the elevator movement.

 S 014-035

 (9)  
Remove the hinge access panel at the hinge to be replaced
 (AMM 06-09-06/201):

 (a)  
Inboard elevator reaction hinge - panel 335DB left, 345DB right.

 (b)  
Outboard elevator reaction hinge - panel 336DB left, 346DB right.

 E.
Remove the Reaction Hinge

 (1)
Use a spanner wrench to remove the bolt assembly (9) (Fig. 402).

 S 034-037

 (2)  
Remove the four bolts (14) and two bolts (15) which attach the reaction hinge to the stabilizer hinge rib (Fig. 402).

 S 024-038

 (3)  
Disengage the hinge fitting (10) from the elevator actuator lug and remove it from the airplane.

 S 034-036
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-31-03
 ALL  ú ú 02 Page 409 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

INBOARD ELEVATOR ACTUATOR REACTION HINGE NOTE:____ LEFT ELEVATOR SHOWN. RIGHT ELEVATOR OPPOSITE.
SEE A OUTBOARD ELEVATOR ACTUATOR REACTION HINGE
SEE A
1
2
3
456

7
8

9 10
12.
 OUTER NUT ELEVATOR

13.
 WASHER

FRONT SPAR
11. INNER NUT
BONDING JUMPER
9. BOLT
18. NUT
ASSEMBLY (6 LOCATIONS)
10. REACTION HINGE
SEE B
A
17. WASHERS (6 LOCATIONS)
14. BOLT
16. WASHERS
15. BOLT (4 LOCATIONS)
B
Elevator Reaction Hinge Installation
Figure 402

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-31-03
 ALL  ú ú 01 Page 410 ú Oct 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 TASK 27-31-03-404-039
 5.  Reaction Hinge Installation (Fig. 402)___________________________
 A.  Special Tools and Equipment
 (1)  
ST2580-267 - Spanner Wrench Adapter Set

 B.  
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 3(42)