(a)  
If the aft ends of the bars touch the higher bolts in the elevator hinge plates, do these steps: 1) Make sure that the bolt head is in the empty space of the

 PCP. 2) Make sure there is only one washer below the bolt head.
 S 492-017
 (5)  Attach the fishpole hoist to the bars and the cables to the sling.
 S 492-018
 CAUTION: MAKE SURE YOU INSTALL THE HOISTS IN THE KEYHOLE SLOTS
_______ CORRECTLY. THE HOISTS CAN DISENGAGE AND CAUSE DAMAGE TO THE ELEVATOR AND ITS PCP.
 (6)  
Make sure that the hoists engage in the keyhole slots on the bars.

 S 492-019

 (7)  
Attach the sling to the sling cradle.

 S 032-020

 (8)  
Lift the weight of the inboard elevator PCP.

 S 022-115
 WARNING: YOU MUST HAVE A MINIMUM OF THREE PERSONS FOR THE CONTROL
_______ PACKAGE REMOVAL. THE CONTROL PACKAGE WEIGHS 200 POUNDS AND CAN EASILY TURN OVER WHEN YOU MOVE IT DOWN. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 (9)  
Remove the inboard elevator PCP (Fig. 202):

 (a)  
Use the spanner wrench adapter,ST2580-267-24 or ST2580-267-32, to remove the actuator bolt (16) of the inboard elevator PCP.

 (b)  
Use the torque wrench adapter, MIT60B80550, to remove the four bolts (12) that attach the trunnion of the inboard elevator PCP to the stabilizer rear spar.

 (c)  
Disengage the sling from the structure:

 1)  Loosen the sling and manually move the inboard elevator PCP at an angle down and aft.
 TASK 27-31-07-402-022
 3.  Inboard Elevator Power Control Package Installation (Fig. 202)
___________________________________________________
 A.  Special Tools and Equipment
 (1)
2PME65B80550 Inboard Elevator Power Control Package Sling Cradle

 (2)
2OHME65B80550 Inboard Elevator Power Control Package Sling

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-31-07
 ALL  ú ú 01 Page 207 ú Oct 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (3)  
Fishpole Hoist, (Commercially Available) (Preferred).

 (4)  
OHME65B00780-1 Fishpole Hoist (Optional).

 (5)  
2TE65B00184 Holding Tool

 (6)  
MIT65B80550 Torque Wrench Adapter

 (7)  
ST2580-267-24 and ST2580-267-32 Spanner Wrench Adapter

 B.
Consumable Materials

 (1)  
A00704 Sealant - RTV 162 (Preferred)

 (2)  
A00280 Sealant - RTV 3145 (Optional)

 (3)  
D00013 Grease - MIL-G-23827

 (4)  
D00054 Lube, Skydrol Assembly - MCS 352

 C. Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 202 | 1 | Bolt-Assy | 27-31-07 | 03 | 50 | | | 4 | Washer | | | 55 | | | 5 | Nut | | | 60 | | | 9 | Actuator | | | 65 | | | 12 | Bolt | | | 5 | | | 13 | Washer | | | 10 | | | 16 | Bolt-Assy | | | 25 | | | 17 | Bushing | | | 30 | | | 18 | Nut | | | 35 | | | 19 | Washer | | | 40 | | | 20 | Nut | | | 45 | | | | | | | | 2......…........…...................................…...........….....…........1
 D. References
 (1)  
AMM 06-09-06/201, Stabilizer and Elevator Access Doors and Panels

 (2)  
AMM 24-22-00/201, Manual Control

 (3)  
AMM 27-31-07/601, Inboard Elevator Power Control Package

 (4)  
AMM 29-11-00/201, Main Hydraulic Supply System

 E.
Access

 (1)  
Location Zone
 335 Elevator Inboard, LH
 345 Elevator Inboard, RH

 (2)  
Access Panel 334HBL Inboard Elevator Actuator Access Panel 344HBR Inboard Elevator Actuator Access Panel

 F.
Prepare for Installation (Figs. 201 and 202)

 S 222-023
 (1)  
Examine for the worn parts at the installation points of the inboard elevator PCP (AMM 27-31-07/601).

 (2)  
Attach the inboard elevator PCP (9) to the sling cradle.

　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 3(60)