R 49-00-00-860-003 APU Start by External Power (GTCP 36-300)
R 49-00-00-860-004 APU Shutdown by External Power (GTCP 36-300) 49-00-00-860-005 APU Start by External Power (APS 3200) 49-00-00-860-006 APU Shutdown by External Power (APS 3200) 49-00-00-860-008 APU Start by External Power (131-9(A)) 49-00-00-860-009 APU Shutdown by External Power (131-9(A)) 28-21-00-991-004 Fig. 503 28-21-00-991-005 Fig. 504
1EFF : ALL 1 28-21-00Page 580 1 1 Nov 01/04 1 1 1CES 1 1EFF : ALL 1 28-21-00Page 581 1 1 Aug 01/05 1 1 1CES 1
3. Job Set-up__________
Subtask 28-21-00-941-074
A. Safety Precautions
(1) Put the safety barriers in position.
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-213,
Subtask 28-21-00-650-059
B. Aircraft Maintenance Configuration
R (1) Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
R (2) Make sure that the applicable fuel tank contains the correct quantity. Refuel, defuel or transfer fuel as necessary (Ref. TASK 12-11-28-650-003), (Ref. TASK 28-25-00-650-001) or (Ref. TASK 28-25-00-869-001):
R R R R (a) Make sure that the inner cell of the LH wing tank contains: - a minimum of 600 kg (1322.7732 lb) and a maximum of 750 kg (1653.4665 lb) of fuel.
R R R R (b) Make sure that the inner cell of the RH wing tank contains: - a minimum of 600 kg (1322.7732 lb) and a maximum of 750 kg (1653.4665 lb) of fuel.
R R (c) Make sure that the center tank contains a maximum of 1200 kg (2645.5464 lb) of fuel.
(3) Make sure that the aircraft is level to +/- 3 deg. pitch and +/- 3 deg. roll (Ref. TASK 08-21-00-200-001) or (Ref. TASK 08-21-00-200-001) or (Ref. TASK 08-21-00-200-001) or (Ref. TASK 08-21-00-200-001) or (Ref. TASK 08-22-00-200-001).
(4) On the panel 40VU:
(a) Make sure that all the TK PUMP pushbutton switches are released (out).
(b) Make sure that the X FEED pushbutton switch is released (out).
R R R R R (5) Put a warning notice in position on the flight deck to tell persons not to operate: - the main booster pumps - the crossfeed valve.
NOTE : You must leave the aircraft in this configuration for a____ minimum of one hour before you do the check.
NOTE : There are two procedures available for the operational check____ of the air-release valves. One procedure uses the TEST EQUIPMENT-APU FUEL FEED (98D28004002000) to do the check, the other procedure uses the APU: - do procedure A to use the TEST EQUIPMENT-APU FUEL FEED (98D28004002000) for the check - do procedure B to use the APU for the check.
R **ON A/C 106-149, 214-299, 401-499,
Subtask 28-21-00-650-059-A
B. Aircraft Maintenance Configuration
R (1) Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
R (2) Make sure that the applicable fuel tank contains the correct quantity. Refuel, defuel or transfer fuel as necessary (Ref. TASK 12-11-28-650-003), (Ref. TASK 28-25-00-650-001) or (Ref. TASK 28-25-00-869-001):
R R R R (a) Make sure that the inner cell of the LH wing tank contains: - a minimum of 600 kg (1322.7732 lb) and a maximum of 750 kg (1653.4665 lb) of fuel.
R R R R (b) Make sure that the inner cell of the RH wing tank contains: - a minimum of 600 kg (1322.7732 lb) and a maximum of 750 kg (1653.4665 lb) of fuel.
R R (c) Make sure that the center tank contains a maximum of 1200 kg (2645.5464 lb) of fuel.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-21-00Page 582 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
(3) Make sure that the aircraft is level to +/- 3 deg. pitch and +/- 3 deg. roll (Ref. TASK 08-21-00-200-001) or (Ref. TASK 08-21-00-200-001) or (Ref. TASK 08-21-00-200-001) or (Ref. TASK 08-22-00-200-001).
(4) On the panel 40VU:
(a) Make sure that all the TK PUMP pushbutton switches are released (out).
(b) Make sure that the X FEED pushbutton switch is released (out).
R R R R R (5) Put a warning notice in position on the flight deck to tell persons not to operate: - the main booster pumps - the crossfeed valve.
NOTE : You must leave the aircraft in this configuration for a____ minimum of one hour before you do the check.
NOTE : There are two procedures available for the operational check____ of the air-release valves. One procedure uses the TEST EQUIPMENT-APU FUEL FEED (98D28004002000) to do the check, the other procedure uses the APU: - do procedure A to use the TEST EQUIPMENT-APU FUEL FEED (98D28004002000) for the check - do procedure B to use the APU for the check.
**ON A/C 301-399,
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM FUEL 燃油3(4)
