1. Reason for the Job
__________________
Refer to the MPD TASK: 282100-04
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific safety barriers
No specific warning notice
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
12-11-28-650-003 Pressure Refuel with Automatic Control 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power
27-80-00-866-004 Extending the Slats on the Ground
27-80-00-866-005 Retracting the Slats on the Ground
28-25-00-650-001 Pressure Defuel
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-21-00Page 594 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-25-00-869-001 Fuel Transfer
31-60-00-860-001 EIS Start Procedure
31-60-00-860-002 EIS Stop Procedure
71-00-00-710-001 Dry Motoring Check
73-25-34-000-040 Removal of the Engine Interface Unit (EIU) (1KS1,1KS2)
73-25-34-400-040 Installation of the Engine Interface Unit (EIU) (1KS1,1KS2)
28-21-00-991-003 Fig. 505
3. Job Set-up__________
Subtask 28-21-00-941-075
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Put a warning notice in position to tell persons not to operate the flight controls.
Subtask 28-21-00-860-059
B. Aircraft Maintenance Configuration
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE
_______ CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE.
(1)
Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
(2)
Do the EIS start procedure (ECAM only) (Ref. TASK 31-60-00-860-001).
(3)
On the ECAM control panel (CP), push (in) the FUEL push icon switch.
(4)
Refuel (Ref. TASK 12-11-28-650-003) or transfer fuel (Ref. TASK 28-25-00-869-001) to get this fuel configuration:
-
the center tank contains more than 500 kg (1100 lb)
-
the applicable outer fuel cell is full of fuel
-
the applicable wing tank contains between 750 kg (1650 lb) and 5000 kg (11000 lb) of fuel.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 28-21-00Page 595 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
(5)
Extend the slats to more than 16 degrees (Ref. TASK 27-80-00-866-004).
(6)
Make sure that the LOCKING TOOL - FLAP/SLAT CONTROL LEVER (98D27803000000) is on the slat/flap control lever.
Subtask 28-21-00-865-052
C. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FUEL/FQI/CHAN/1 1QT A13 121VU FUEL/FQI/CHAN/2 2QT M27 121VU FUEL/CTR TK/PUMP2 SPLY 30QA P26 121VU FUEL/CTR TK/PUMP1 SPLY 29QA P23 121VU FUEL/CTR TK/AUTO/CTL 47QA R27 121VU FUEL/CTR TK/PUMPS1 AND 2/CTL AND IND 32QA R26 121VU FUEL/CTR TK/PUMPS1 AND 2/CTL AND IND 31QA R25
4. Procedure
_________
(Ref. Fig. 505/TASK 28-21-00-991-003)
Subtask 28-21-00-710-051
A. Operational Test of Main Fuel Pump System to Ensure Both Center Tank Pumps Feed for 2 Mn After Engine Start (Method 1)
NOTE : To do this method of the test you must remove the Engine Interface
____
Unit (EIU)
NOTE : During this test the ECAM can show unwanted indications, which you
____
can ignore.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the panel 40VU: On the panel 40VU:
-make sure the MODE SEL P/BSW is - the MODE SEL P/BSW MAN light is on released (out)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油3(8)
