Subtask 78-36-41-010-060
 B. Get Access
 (1) Make sure that the fan cowl doors are open: (Ref. TASK 71-13-00-010-040) FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR

 (2) Make sure that the right thrust reverser door is open: (Ref. TASK 78-36-00-010-040) FOR 1000EM1 452AR FOR 1000EM2 462AR

 Subtask 78-36-41-040-056
 C. Make sure that the thrust reverser is unserviceable (Ref. TASK 78-30-00-481-041).
 F 『 EEFF : ALL E Page 40778-36-41
 E E Feb 01/98 E E ECES E

 F  『
 E  C F M  E
 E  E

 E 56-5B E
 E E

 4. Procedure
_________
 (Ref. Fig. 401/TASK 78-36-41-991-300)
 Subtask 78-36-41-420-050

 A. Installation of the Thrust Reverser Half Door Latches:
 (1) Installation of the Forward Half Door Latches
 (a) Put the latches (15) into position and install the bolt (20) and the nut (10).

 (b) Tighten the nut (10) until the clearance between the half door and the nut is from 0.0019 in. (0.05 mm) to 0.009 in. (0.23 mm).

R (c) Safety the nut (10) with a new cotter pin (05).
 (2) Installation of the Middle Half Door Latch
 (a) Put the latch (25) into position and install the bolt (30) and the nut (10).

 (b) Tighten the nut (10) until the clearance between the cowl structure and the nut is from 0.0019 in. (0.05 mm) to 0.009 in.

 (0.23 mm). R (c) Safety the nut (10) with a new cotter pin (05).

 (3) Installation of the Aft Half Door Latch
 (a) Put the latch (25) into position and install the bolt (35) and the nut (10).

 (b) Tighten the nut (10) until the clearance between the cowl structure and the nu t is from 0.0019 in. (0.05 mm) to 0.009 in.

 (0.23 mm). R (c) Safety the nut (10) with a new cotter pin (05).

 F 『 EEFF : ALL E Page 40878-36-41
 E E Aug 01/03 E E ECES E 5. Close-up

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

________ Subtask 78-36-41-410-050
 A. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.

 (2) Close the right thrust reverser door (Ref. TASK 78-36-00-410-040) FOR 1000EM1 452AR FOR 1000EM2 462AR

 Subtask 78-36-41-440-050
 B. Make the thrust reverser serviceable (Ref. TASK 78-30-00-081-041). Subtask 78-36-41-410-051
 C. Close Access
 (1) Close the fan cowls (Ref. TASK 71-13-00-410-040):
 FOR 1000EM1
 437AL, 438AR
 FOR 1000EM2
 447AL, 448AR

 (2) Remove the warning notice(s).

 F 『 EEFF : ALL E Page 40978-36-41
 E E Feb 01/98 E E ECES E

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 TASK 78-36-41-000-044 Removal of the Thrust Reverser Half Door Stirrups
 1. Reason for the Job

__________________
 Self Explanatory

 2. Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors 78-30-00-481-041 Make the Thrust Reverser Unserviceable for
 Maintenance 78-36-00-010-040 Opening of the Thrust Reverser Doors 78-36-41-991-301 Fig. 402
 3. Job Set-up
__________ Subtask 78-36-41-941-051
 A. Safety Precautions
 (1) On the center pedestal, on the ENG panel 115VU:

 (a) Put a warning notice to tell persons not to start the engine.

 (2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.

 (3) On the overhead maintenance panel 50VU:

 (a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
 F 『 EEFF : ALL E Page 41078-36-41
 E E Feb 01/98 E E ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E

 (b) Put a warning notice to tell persons not to energize the FADEC 1(2).
 Subtask 78-36-41-010-052
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EXHAUST 2(101)