(15) Attach the hinge access panel to the top of the half door with screws. (Ref. Fig. 403/TASK 78-32-11-991-304)

 (16) TORQUE the screws to between 35 and 45 lbf.in (0.39 and 0.50 m.daN).

 (17) Remove the blanking caps from the electrical connectors.

 F 『 EEFF : ALL E Page 41978-32-11
 E E Aug 01/03 E E ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E

 (18) Connect the right electrical harness connector to the electrical junction box. (Ref. Fig. 402/TASK 78-32-11-991-303)

 (19) Connect the electrical connectors (4100KS-A and 4100KS-B) to the electrical junction box.

 (20) Remove the blanking caps from the nipples.
 (Ref. Fig. 401/TASK 78-32-11-991-302)

 (21) Connect the left or right interface hydraulic hoses.

 (22) TORQUE the left or right latch return hose to between 113 and 125 lbf.in (1.27 and 1.41 m.daN).

 (23) TORQUE the right supply hose to between 540 and 600 lbf.in (6.10 and

 6.78 m.daN).

 (24) TORQUE the right return hose to between 630 and 700 lbf.in (7.11 and

 7.91 m.daN).

 (25) TORQUE the right upper latch return hose to between 113 and 125 lbf.in (1.27 and 1.41 m.daN).

 (26) TORQUE the left or right actuator head supply hose to between 540 and 600 lbf.in (6.10 and 6.78 m.daN).

 (27) TORQUE the left or right actuator rod supply hose to between 270 and 300 lbf.in (3.05 and 3.39 m.daN).

 (28) TORQUE the left supply hose to between 113 and 125 lbf.in (1.27 and

 1.41 m.daN).
R Subtask 78-32-11-820-055
R C. Adjust thrust reverser "J" Ring (Ref. TASK 78-36-42-820-002).
 Subtask 78-32-11-820-051
R D. Adjust thrust reverser door latches (Ref. TASK 78-36-41-820-042).
 Subtask 78-32-11-410-058
R E. Install left or right fan cowl door (Ref. TASK 71-13-11-400-041).
 F 『 EEFF : ALL E Page 42078-32-11
 E E Aug 01/05 E E ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E
 Subtask 78-32-11-440-053

R F. Make the thrust reverser serviceable: (Ref. TASK 78-30-00-081-041).
 Subtask 78-32-11-942-050
R G. Remove the access platform(s).
 Subtask 78-32-11-869-053
R H. Make sure that the work area is clean and clear of tool(s) and other items.
 Subtask 78-32-11-865-051
R J. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 3801GX, 3802GX, 3803GX
 Subtask 78-32-11-710-050
R K. Bleed the air from the thrust reverser hydraulic system. (Ref. TASK 78-30-00-710-040)
 (1) Check the hydraulic connections for leakage.
 5. Close-up
________
 Subtask 78-32-11-410-059

 A. Close Access
 (1) Close the fan cowl doors: (Ref. TASK 71-13-00-410-040) FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR
 (2) Remove the warning notice(s).
 Subtask 78-32-11-820-050

 B. Do the adjustment/test of the fan cowl doors (Ref. TASK 71-13-00-800-041).
 F 『 EEFF : ALL E Page 42178-32-11
 E E Aug 01/05 E E ECES E Subtask 78-32-11-710-051

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E

 C. Do an operational test of the thrust reverser system (Ref. TASK 78-31-00-710-042). Do 10 deploy-to-stow cycles to air bleed the thrust reverser hydraulic circuit.
 NOTE : As an alternative procedure you can do this operational test
____
 without the CFDS:

 - first method with engine not running (Ref. TASK 78-31-00-710-043)

 - second method with engine running (Ref. TASK 78-31-00-710-043)

 F 『 EEFF : ALL E Page 42278-32-11
 E E Feb 01/98 E E ECES E

 F  『
 E  C F M  E
 E  E

 E 56-5B E
 E E
 COWL - THRUST REVERSER - INSPECTION/CHECK

_________________________________________
 TASK 78-32-11-210-001
 Detailed Visual Inspection of the Thrust Reverser
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific brush No specific warning notice No specific access platform 1 m (3 ft. 3 in.) No specific Torque Wrench : range 35 to 45 lbf.in
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EXHAUST 2(54)