F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
E. Hole 1.0 in. (25.4 mm) maximum diameter.
7.4 in. (188 mm) minimum distance from other holes, cracks or delaminations.
Five holes maximum per blocker door.
F. Nick, scratch 0.008 in. (0.2 mm) maximum depth over a 8.0 in. (203.2 mm) length.
replace the blocker door. (Ref. TASK 78-32-41-000-001) or (Ref. TASK 78-32-41-000-002) and (Ref. TASK 78-32-41-400-001) or (Ref. TASK 78-32-41-400-002).
Monitor at "A" check.
Seal damaged area fromentrance of moisture withaerodynamic tape (MaterialNo. CP2517).
If the hole is not in theserviceable limits, replace the blocker door. (Ref. TASK 78-32-41-000-001) or (Ref. TASK 78-32-41-000-002) and (Ref. TASK 78-32-41-400-001) or (Ref. TASK 78-32-41-400-002).
Monitor at "A" check.Seal damaged area fromentrance of moisture with aerodynamic tape (Material No. CP2517).
Replace tape if peeled or damaged.
If the nick or scratch is not in the serviceable limits, replace the
F 『 EEFF : ALL E Page 60778-32-41
E E Feb 01/98 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS
-------------------------------------------------------------------------------blocker door. (Ref. TASK 78-32-41-000-001) or (Ref. TASK 78-32-41-000-002) and (Ref. TASK 78-32-41-400-001) or (Ref. TASK 78-32-41-400-001).
2. Examine the kicker plate for:
A. Damage No damage permitted. If there is damage, replace the kicker plate. (Ref. TASK 78-32-41-000-004) and (Ref. TASK 78-32-41-400-004).
3. Examine the latch fitting and the roller for:
A. Damage No damage permitted. If there is damage, replace the latch fitting. (Ref. TASK 78-32-41-000-003) and (Ref. TASK 78-32-41-400-003).
B. Crack No crack permitted. If there is crack, replace the latch fitting. (Ref. TASK 78-32-41-000-003) and (Ref. TASK 78-32-41-400-003).
C. Jamming The roller must be free If the roller is not free
to turn. to turn remove it, (Ref. TASK 78-32-41-000-003) and reinstall it. (Ref. TASK 78-32-41-400-003).
4. Examine the pivot access door for:
F 『 EEFF : ALL E Page 60878-32-41
E E Feb 01/98 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
A. Damage No damage permitted. If you find some damage or missing, replace the defective part. (Ref. TASK 78-32-41-000-001) or (Ref. TASK 78-32-41-000-002) and (Ref. TASK 78-32-41-400-001) or (Ref. TASK 78-32-41-400-002).
5. Examine the access door for:
A. Damage No damage permitted. If you find some damage or missing, replace the defective part. (Ref. TASK 78-32-41-000-001) or (Ref. TASK 78-32-41-000-002) and (Ref. TASK 78-32-41-400-001) or (Ref. TASK 78-32-41-400-002).
5. Close-up
________
Subtask 78-32-41-080-051
A. Remove the SAFETY SLEEVE - PIVOTING DOOR ACTUATOR (HIX3005) from the blocker door actuator without making thrust reverser operational (Ref. TASK 78-32-41-080-001).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EXHAUST 2(76)
