曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 contact).
 - NSA938193, NSA938194 and E0397 (dummy contact).
 - NSA938403, E0380 and E0397 (dummy contacts).
 ____________________________________________________________2. Connection Procedure for Contacts E0395, E0396 and NSA938402
 A. Contacts P/N and Characteristics
 (Ref. Fig. 001, 002)
 -----------------------------------------------------------------------|
 | | USE WITH |
 | CONTACTS |---------------------------------------------------|
 | | PLUG | RECEPTACLE |
 |----------------------------------------------------------------------|
 | E0380 | E0237 | E0237 |
 |------------------|-------------------------|-------------------------| 
R  | | ABS0713 - E0237 - E0302 | ABS0713 - ABS1495 | 
R  | E0395 | E0362 - E0390 - E0684 | E0237 - E0302 | 
R  | | E0756 - NSA938026 | E0362 - E0390 - E0734 | 
R  | | NSA938027 - NSA938361 | NSA938028 - NSA938361 |
 |------------------|-------------------------|-------------------------|
 | | ABS0713 - E0237 - E0302 | 058-014-00 | 
R  | | E0362-E0390-E0417-E0658 | ABS0713 - ABS1495 | 
R  | E0396 | E0684-E0756 - NSA938026 | E0237 - E0302 - E0362 | 
R  | | NSA938027 - NSA938361 | E0390 - E0425 - E0734 | 
R  | | | NSA938028 - NSA938361 |
 |------------------|-------------------------|-------------------------| 
R  | | E0237 - E0362 - E0390 | ABS1495 - E0237 | 
R  | E0397 | NSA938026 - NSA938027 | E0362 - E0390 | 
R  | | NSA938361 | NSA938028 - NSA938361 |
 |------------------|-------------------------|-------------------------|
 | NSA938402 | E0362 - NSA938361 | E0362 - NSA938361 |
 ------------------------------------------------------------------------
B. Contact Insertion and Extraction Tools
 (Ref. Fig. 003)
 C. Dummy Contacts
 (Ref. Fig. 004, 005)

 

 Normal Contacts - P/N Characteristics
 E0395, E0396 and NSA938402
 Figure 001

 

20-48-21 Page 2

 Normal Contacts - P/N Characteristics
 E0395, E0396 and NSA938402
 Figure 002

 

20-48-21 Page 3

 Normal Contacts - Insertion/Extraction Tools
 E0395, E0396 and NSA938402
 Figure 003

 

20-48-21 Page 4

R Dummy Contacts - Insertion/Extraction Tools E0397 Figure 004

20-48-21 Page 5

 Dummy Contacts - Insertion/Extraction Tools
 E0380
 Figure 005

 

20-48-21 Page 6

 D. Wire Stripping
 (Ref. Fig. 006, 007)

 (1) Normal wire If sealing is necessary, install the heat-shrinkable sleeve on the wire before stripping. Shrinking is made after crimping.
R Strip the cable to the length "E".
 (2) Special wires
 E0437DL22 and DL20
 NSA935132DJ20

 (a)
 Remove the fiberglass braid then the PTFE envelope over a length of 50 mm (1.9685 in.).

 (b)
 Strip the core cable over a length of 35 mm (1.3779 in.).

 (c)
 Install the heat shrinkable sleeve in order to cover the outer sheath over 10 mm (0.3937 in.) and shrink.

 (d)
 Strip the core cable recovered by the heat shrinkable sleeve at the normal length "E".

 E. Crimping Procedure and Tools
 (Ref. Fig. 008, 009)

 (1)
 Engage the stripped wire in the pin/socket.

 (2)
 Make sure that you can see the wire conductor through the inspection hole.

 (3)
 Install the pin/socket contact in the positioner.

 (4)
 Fully close the tool handles until the safety ratchet releases.

 (5)
 Remove the crimped contact.

 (6)
 If necessary, heat shrink the sleeve.

 

20-48-21 Page 7

 Normal Contacts - Wire Stripping and Sleeves Shrinking
 E0395, E0396 and NSA938402
 Figure 006

 

20-48-21 Page 8

 Normal Contacts - Wire Stripping
 E0395, E0396 and NSA938402
 Figure 007

 

20-48-21 Page 9

R Normal Contacts - Crimping Tools E0395 and E0396 Figure 008

20-48-21 Page 10

 Normal Contacts - Crimping Tools
 NSA938402
 Figure 009

 

20-48-21 Page 1120-48-21 Page 12

 ______________________________________________________________________3. Connection Procedure for Contacts NSA938151, NSA938152, EN3155-018 and EN3155-019.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 4(25)