-NSA937910
 -NSA938190 and NSA938191
 _________________________________________
2. Connection Procedure for Contacts ABS0058 (Ref. Fig. 001)
 A. Contact P/N and Characteristics ------------------------------------------------------------------| | USE WITH | | CONTACTS |---------------------------------------------| | | PLUG | RECEPTACLE | |------------------|------------------------|--------------------| | ABS0058 | -| ABS0057 | ------------------------------------------------------------------
B. Temperature
 Minimum operating temperature is 40 deg.C (104.00 deg.F)
 Maximum operating temperature is 90 deg.C (194.00 deg.F)

 C. Wire Stripping
 (Ref. Fig. 001)
 Strip to the applicable length "A".

 D. Crimping Procedure and Tools
 (Ref. Fig. 001)

-Put the nut and the strain relief on the wire.
 -Engage the stripped wire into the contact.
 -Install the contact in the applicable crimping tool.
 -Fully close the tool handles until the safety ratchet releases.
 -Remove the crimped contact.

20-48-25 Page 1

R Miscellaneous Contacts - P/N Characteristics, Stripping and Crimping Tools R ABS0058 R Figure 001

20-48-25 Page 220-48-25 Page 3

R
R  _________________________________________3. Connection Procedure for Contacts ABS1438 
R  (Ref. Fig. 002) 
R  A. Contact P/N and Characteristics 
R  ------------------------------------------------------------------
R  | | USE WITH | 
R  | CONTACTS |---------------------------------------------| 
R  | | PLUG | RECEPTACLE | 
R  |------------------|------------------------|--------------------| 
R  | ABS1438 | -| ABS1438D/E | 
R  ------------------------------------------------------------------
R  B. Contact Insertion and Extraction Tools 
R  (Ref. Fig. 002) 
R  C. Wire Stripping 
R  (Ref. Fig. 002) 
R  Strip the wire to the length "A" with the applicable tool. 
R  D. Crimping Procedure and Tools 
R  (Ref. Fig. 002) 
R  - Install a shrink sleeve E0718-20-15 on the wire (for wire gauge 26, in 
R  sealed module type). 
R  - Engage the stripped wire into the contact. 
R  - Make sure that you can see the wire through the contact inspection 
R  hole. 
R  - Install the contact in the applicable crimping tool. 
R  - Fully close the tool handles until the safety ratchet releases. 
R  - Remove the crimped contact. 
R  - If installed, shrink the sleeve and make sure that there is no overlap 
R  on the contact.

R Miscellaneous Contacts - P/N Characteristics and Tools R ABS1438 R Figure 002

20-48-25 Page 420-48-25 Page 5

R  _______________________________________4. Connection Procedure for Contacts E0078 
R  (Ref. Fig. 003, 004, 005) 
R  A. Contact P/N and Characteristics 
R  ------------------------------------------------------------------
R  | | USE WITH | 
R  | CONTACTS |---------------------------------------------| 
R  | | PLUG | RECEPTACLE | 
R  |------------------|------------------------|--------------------| 
R  | E0078 | NSA932844 | NSA932805 | 
R  | | NSA932847 | | 
R  ------------------------------------------------------------------
R  B. Temperature 
R  Minimum operating temperature is -55 deg.C (-67.00 deg.F) 
R  Maximum operating temperature is +150 deg.C (+302.00 deg.F) 
R  C. Contact Insertion and Extraction Tools 
R  (Ref. Fig. 003) 
R  D. Wire Stripping 
R  (Ref. Fig. 003) 
R  E. Crimping Procedure and Tools 
R  - If necessary, install the shrink sleeve on the wire. 
R  - Engage the stripped wire into the contact. 
R  - Make sure that you can see the wire through the contact hole. 
R  - Install the contact in the crimping tool. 
R  - Fully close the tool handles until the safety ratchet releases. 
R  - Remove the crimped contact. 
R  - If installed, retract the sleeve.

R Miscellaneous Contacts - P/N Characteristics E0078
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 4(39)