曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 -Engage the contact outer body (1).
 -Strip the wire at the size "B" and "C".
 -Slide the washer AN960C4 (2) and the isolating sleeve (3) on the wire.
 -Solder the contact core (4) on the wire conductor.
 -Put the braided shield against the washer.
 -Cut the braid if necessary around the washer (2) for a good contact.
 -Engage the contact inner body (5) in the contact outer body (1).
 -Screw the cntact outer body (1), and make sure that the contact inner body does not turn.

20-45-91 Page 7

 Standby Compass Connectors - P/N Characteristics and Contacts
 E0511
 Figure 004

 

20-45-91 Page 8

 Standby Compass and VU Panel Lighting Connectors - Contact and Wire Stripping E0511 Figure 005

20-45-91 Page 9

 ________________
4. Connection Table (Ref. Fig. 006)

20-45-91 Page 10

 Standby Compass and VU Panel Lighting Connectors - Connection Table
 Figure 006

 

20-45-91 Page 11

 ________________________________________________________________
TELEPHONE JACKS AND AUDIO CONNECTORS - DESCRIPTION AND OPERATION
 _______
1. General The telephone jacks and audio connectors installed on aircraft have the codes that follow :
 -Telephone Jack : E0330 NSA938905 (Type XLR-XLP) NSA938906
 -Audio Connector: ABS0057
 _______________2. Telephone Jacks
 A. E0330
 (1)
 P/N identification

 E0330  -01 | | | -------------------- Type code ------------------------------- Standard P/N

 (2)
 P/N characteristics

 (a) Contact layout (Ref. Fig. 001)

 (3)
 Connection procedure Soldered.

 B. NSA938905 (Type XLR-XLP)
 (1)
 P/N identification

 | -------------------- Contact arrangement code -------------------------------- Standard P/N

 (2)
 P/N characteristics

 (a)
 Variant code 31 = with socket contacts 32 = with pin contacts

 (b)
 Contact arrangement code (Ref. Fig. 002)

 

 NSA938905  - 4  - 31
 |  |  |
 |  |  ----------- Variant code

 

20-45-92 Page 1

 Telephone Jacks and Audio Connectors - P/N Characteristics and Layout
 E0330
 Figure 001

 

20-45-92 Page 2

 Telephone Jacks and Audio Connectors - Contact Arrangements
 NSA938905
 Figure 002

 

20-45-92 Page 3

 (3) Connection procedure Soldered.
 C. NSA938906
 (1)
 P/N identification

 --------------------------------------- Standard P/N

 (2)
 P/N characteristics

 (a)
 Type code 26 = with 2 contacts 35 = with 3 contacts 46 = with 4 contacts

 (b)
 Contact arrangement code (Ref. Fig. 003)

 

 (3)
 Connection procedure Soldered.

 NSA938906  -26  - 0
 |  |  |
 |  |  ------------------ Electrical diagram code
 |  -------------------------- Type code

 

20-45-92 Page 4

 Telephone Jacks and Audio Connectors - Contact Arrangements
 NSA938906
 Figure 003

 

20-45-92 Page 5

 ________________
3. Audio Connectors
 A. ABS0057
 (1) P/N identification
 ABS0057  -01  - C
 |  |  |
 |  |  ---------- Electrical diagram code | C = without contact
 |  |  | No code = with contact
 |  ----------------- Size code

 -------------------------- Standard P/N
 (2)
 P/N characteristics

 (a)
 Temperature Minimum operating temperature is 40 deg.C (104.00 deg.F). Maximum operating temperature is 90 deg.C (194.00 deg.F).

 (b)
 Connection arrangement (Ref. Fig. 004)

 

 (3)
 Connection procedure For connection procedure ref. Connection Table paragraph

 ________________
4. Connection Table (Ref. Fig. 005)

20-45-92 Page 6

 Audio Connectors - P/N Characteristics and Connection Arrangement
 ABS0057
 Figure 004

 

20-45-92 Page 7

 Telephone Jacks and Audio Connectors - Connection Table
 Figure 005

 

20-45-92 Page 8

 ________________________________________________________________________
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 4(5)