曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-35
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SPEED BRAKE LEVER POSITION SENSOR - REMOVAL/INSTALLATION
1. General
A. This procedure has these tasks:
(1) A removal of the speed brake lever position sensor.
(2) An installation of the speed brake lever position sensor.
(3) An adjustment of the speed brake lever position sensor.
B. In this procedure the speed brake lever position sensor is referred to as the "sensor".
TASK 27-62-37-000-801
2. Speed Brake Lever Position Sensor Removal
(Figure 401)
A. Location Zones
Zone Area
112 Area Forward of Nose Landing Gear Wheel Well
211 Flight Compartment - Left
212 Flight Compartment - Right
B. Access Panels
Number Name/Location
112A Forward Access Door
C. Prepare for the Removal
SUBTASK 27-62-37-860-001
(1) Open this circuit breaker and install safety tag:
F/O Electrical System Panel, P6-2
Row Col Number Name
B 9 C00440 FLIGHT CONTROL AUTO SPEED BRAKE
SUBTASK 27-62-37-860-002
(2) Put the speed brake lever in the DOWN position.
SUBTASK 27-62-37-010-001
(3) To get access to the sensor [1].
Open this access panel:
Number Name/Location
112A Forward Access Door
D. Sensor Removal
SUBTASK 27-62-37-020-001
(1) Disconnect the electrical connector [7] from the sensor [1].
SUBTASK 27-62-37-020-002
(2) Loosen the clamping bolt [5] from the crank [4].
SUBTASK 27-62-37-020-003
(3) loosen the clamping bolt [5] on the sensor support bracket [6].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-37
Page 401
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-62-37-020-004
(4) Remove the sensor [1].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-37
Page 402
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Speedbrake Lever Position Sensor Installation
Figure 401 (Sheet 1 of 2)/27-62-37-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-37
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Speedbrake Lever Position Sensor Installation
Figure 401 (Sheet 2 of 2)/27-62-37-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-37
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-62-37-400-801
3. Speed Brake Lever Position Sensor Installation
(Figure 401)
A. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
SPL-1585 Kit - Rigging Pins, All Systems
(Part #: F70207-109, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -900ER, -BBJ)
B. Location Zones
Zone Area
112 Area Forward of Nose Landing Gear Wheel Well
211 Flight Compartment - Left
212 Flight Compartment - Right
C. Sensor Installation
SUBTASK 27-62-37-420-001
(1) Install the sensor [1]:
(a) Put the sensor [1] in the sensor support bracket [6].
(b) Align the index mark on the sensor shaft [3] with the center line on the crank [4].
(c) Tighten the two clamping bolts [5].
SUBTASK 27-62-37-860-003
(2) Put the speed brake lever in the DOWN position.
SUBTASK 27-62-37-480-001
(3) Install the rig pin S/B-1 from the test set rig pin kit, SPL-1585 in the forward drum of the speed
brake mechanism.
SUBTASK 27-62-37-420-002
(4) Connect the electrical connector [7] to the sensor [1].
SUBTASK 27-62-37-080-001
(5) Remove the rig pin S/B-1 from the forward drum of the speed brake mechanism.
SUBTASK 27-62-37-860-004
(6) Remove the safety tag and close this circuit breaker:
F/O Electrical System Panel, P6-2
Row Col Number Name
B 9 C00440 FLIGHT CONTROL AUTO SPEED BRAKE
SUBTASK 27-62-37-820-001
(7) Do this task: Speed Brake Lever Position Sensor Adjustment, TASK 27-62-37-400-802.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊7 AIRCRAFT MAINTENANCE MANUA(11)