曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

112A Forward Access Door
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-31
Page 401
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
E. Auto Speed Brake Actuator Removal
SUBTASK 27-62-31-020-001
(1) Disconnect the electrical connector [17] from the auto speed brake actuator assembly [16].
SUBTASK 27-62-31-020-002
(2) Remove the nut [8], washer [6] and bolt [5] and disconnect the bonding jumper [7].
SUBTASK 27-62-31-020-003
(3) Remove the pin [13], nut [12] washer [11] and bolt [10] that connect the auto speed brake
actuator assembly [16] to the brake lever [15].
SUBTASK 27-62-31-020-004
(4) Remove the lockwire [3], washer [2] and bolt [1] that connect the auto speed brake actuator
assembly [16] to the structure.
SUBTASK 27-62-31-020-005
(5) Remove the auto speed brake actuator assembly [16] from the airplane.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-31
Page 402
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Auto Speedbrake Actuator Installation
Figure 401 (Sheet 1 of 5)/27-62-31-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-31
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Auto Speedbrake Actuator Installation
Figure 401 (Sheet 2 of 5)/27-62-31-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-31
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Auto Speedbrake Actuator Installation
Figure 401 (Sheet 3 of 5)/27-62-31-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-31
Page 405
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Auto Speedbrake Actuator Installation
Figure 401 (Sheet 4 of 5)/27-62-31-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-31
Page 406
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Auto Speedbrake Actuator Installation
Figure 401 (Sheet 5 of 5)/27-62-31-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-31
Page 407
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-62-31-400-801
3. Auto Speed Brake Actuator Installation
(Figure 401)
A. References
Reference Title
27-62-00-820-806 Speed Brake Throttle Switch Test (P/B 501)
27-62-00-840-802 Put the Speed Brake Systems A and B Back to the Condition Before
the Pressure Removal (P/B 201)
B. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
SPL-1585 Kit - Rigging Pins, All Systems
(Part #: F70207-109, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -900ER, -BBJ)
C. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
13 Pin 27-62-31-02-120 GUN ALL
16 Actuator assembly 27-62-31-02-140 GUN ALL
D. Location Zones
Zone Area
112 Area Forward of Nose Landing Gear Wheel Well
211 Flight Compartment - Left
212 Flight Compartment - Right
E. Access Panels
Number Name/Location
112A Forward Access Door
F. Auto Speed Brake Actuator Installation
SUBTASK 27-62-31-480-001
(1) Install the rig pin S/B-1 from the test rig pin kit, SPL-1585.
(a) Adjust the speed brake mechanism if you cannot easily install the rig pin:
1) Remove the nut [26], washer [25] and bolt [24] to disconnect the top end of the lower
control rod [14] from the idler link [23].
2) Install the rig pin S/B-1.
3) Loosen the checknut [27] and adjust the lower control rod [14] end until you can install
the bolt [24].
4) Install the bolt [24], washer [25] and nut [26] to attach the lower control rod [14] end to
the idler link [23].
5) Tighten the checknut [27] on the rod end.
737-600/700/800/900
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊7 AIRCRAFT MAINTENANCE MANUA(5)