曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

1) Make sure there is no continuity between pins 8 and 9.
(k) Slowly move the left thrust lever aft until there is continuity between pins 8 and 9.
1) Make sure the clearance between the speed brake lever dog [4] and the detent plate
assembly lip [5] is 0.0200 to 0.0400 inch (0.5080 to 1.0160 millimeters).
(l) Slowly move the left reverse thrust lever forward until there is no continuity between pins 8
and 9.
1) Make sure the speed brake lever dog [4] is 0.0100 inches (0.2540 millimeters) above the
detent plate assembly lip [5].
(m) Move the left reverse thrust lever to the down and stowed position.
1) Make sure there is no continuity between pins 8 and 9.
(n) Slowly move and the right reverse thrust lever aft until there is continuity between pins 8
and 9.
1) Make sure the speed brake lever dog [4] is 0.0400 to 0.0600 inches (1.0160 to 1.5240
millimeters) above the detent plate assembly lip [5].
(o) Slowly move the right reverse thrust lever forward until there is no continuity between pins
8 and 9.
1) Make sure the speed brake lever dog [4] is 0.0100 inches (0.2540 millimeters) above the
detent plate assembly lip [5].
(p) Move the right reverse thrust lever to the down and stowed position.
1) Make sure there is no continuity between pins 8 and 9.
SUBTASK 27-62-32-410-002
(2) Install screws [1] and washers [2] to attach the cover plate [3] on the control stand.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-32
Page 406
Jun 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SPEED BRAKE ARMED SWITCH AND SPEED BRAKE HANDLE POSITION SWITCH - REMOVAL/
INSTALLATION
1. General
A. This procedure has these tasks:
(1) A removal of the speed brake armed switch (S276) and the speed brake handle position switch
(S918).
(2) An installation of the speed brake armed switch and the speed brake handle position switch.
(3) An adjustment of the speed brake armed switch and the speed brake handle position switch.
(a) The speed brake armed switch and the speed brake handle position switch must be
adjusted together because they have the same attaching bolts.
TASK 27-62-34-000-801
2. Speed Brake Armed Switch and Speed Brake Handle Position Switch Removal
(Figure 401)
A. Location Zones
Zone Area
112 Area Forward of Nose Landing Gear Wheel Well
211 Flight Compartment - Left
212 Flight Compartment - Right
B. Access Panels
Number Name/Location
112A Forward Access Door
C. Prepare for the Removal
SUBTASK 27-62-34-860-001
(1) Move the speed brake lever to a position in the middle of its travel.
SUBTASK 27-62-34-860-002
(2) Open this circuit breaker and install safety tag:
F/O Electrical System Panel, P6-2
Row Col Number Name
B 9 C00440 FLIGHT CONTROL AUTO SPEED BRAKE
SUBTASK 27-62-34-010-001
(3) To get access to the speed brake armed switch [1] and the speed handle position switch [6], do
this step:
Open this access panel:
Number Name/Location
112A Forward Access Door
D. Switch Removal
SUBTASK 27-62-34-020-001
(1) Disconnect the electrical leads [2] from the speed brake armed switch [1] and the speed brake
handle position switch [6].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-34
Page 401
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-62-34-020-002
(2) Remove the bolts [3], washers [4] and nuts [5].
SUBTASK 27-62-34-020-003
(3) Remove the speed brake armed switch [1] and the speed brake handle position switch [6].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-34
Page 402
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Speedbrake Armed Switch and Speedbrake Handle Position Switch Installation
Figure 401 (Sheet 1 of 2)/27-62-34-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-34
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Speedbrake Armed Switch and Speedbrake Handle Position Switch Installation
Figure 401 (Sheet 2 of 2)/27-62-34-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-34
Page 404
Oct 10/2003
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊7 AIRCRAFT MAINTENANCE MANUA(8)