曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

G01912 Lockwire - Monel (0.032 In. Dia.) NASM20995N~
C32
(QQ-N-281)
C. Location Zones
Zone Area
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
D. Prepare for the Installation
SUBTASK 27-62-51-860-004
(1) Make sure the hydraulic pressure is removed from system A. To remove it, do this task:
Remove Pressure from the Speed Brake Hydraulic Systems A and B,
TASK 27-62-00-800-802.
E. Lower Slider Installation
SUBTASK 27-62-51-420-004
(1) Install the lower slider assembly [6] to the cable [1]:
(a) Connect the lower slider assembly [6] to the cable [1] at the quick disconnect, then turn and
tighten the sleeve [7].
(b) Install the nut [5], washer [4], washer [3], and bolt [2] which connect the lower slider
assembly [6] to the landing gear.
(c) Install the lockwire, G01912 to the sleeve [7] and bolts [11].
SUBTASK 27-62-51-860-005
(2) Do this task: Ground Spoiler Interlock Valve Adjustment, TASK 27-62-00-820-803 or this task:
Ground Spoiler Interlock Valve Adjustment (Alternate Method), TASK 27-62-00-820-811.
(3) Do this task: Put the Speed Brake Systems A and B Back to the Condition Before the
Pressure Removal, TASK 27-62-00-840-802.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-51
Page 409
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-62-51-000-801
4. Ground Spoiler Interlock Valve Cable Removal
(Figure 401)
A. References
Reference Title
27-62-00-800-802 Remove Pressure from the Speed Brake Hydraulic Systems A and B
(P/B 201)
32-13-11-000-804 Main Landing Gear Inner Door Removal (P/B 401)
B. Location Zones
Zone Area
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
C. Prepare for the Removal
SUBTASK 27-62-51-860-006
(1) Make sure the hydraulic pressure in system A is released, do this task: Remove Pressure from
the Speed Brake Hydraulic Systems A and B, TASK 27-62-00-800-802.
SUBTASK 27-62-51-020-005
(2) To remove the lower slider, do this task: Lower Slider Removal, TASK 27-62-51-000-802.
D. Cable Removal
SUBTASK 27-62-51-020-006
(1) Remove the cable [1]:
(a) Remove the lockwires.
(b) Remove the bolts [11] and washers [10] that attach the retainer [9] to the clip assembly [8].
(c) Remove the clip assembly [8].
(d) Remove the nut [15], washer [14], washer [13], and bolt [12].
(e) Remove the bolts [19] and washers [18] from the retainer [17].
(f) Remove the nut [23], washer [22], and bolt [21] from the retainer [17].
(g) To remove the center door [34], do this task: Main Landing Gear Inner Door Removal,
TASK 32-13-11-000-804.
(h) Remove the screws [26], washers [27], and clamps [25] that attach the cable [1] to the
airplane structure.
(i) Remove the screws [29], washers [30], and clamps [28] that attach the cable [1] to the
airplane structure.
(j) Remove the screws [32], washers [33], and clamps [31] that attach the cable [1] to the
airplane structure.
(k) Remove the cable [1].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-51
Page 410
Oct 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-62-51-400-801
5. Ground Spoiler Interlock Valve Cable Installation
(Figure 401)
A. References
Reference Title
27-62-00-800-802 Remove Pressure from the Speed Brake Hydraulic Systems A and B
(P/B 201)
27-62-00-820-803 Ground Spoiler Interlock Valve Adjustment (P/B 501)
27-62-00-820-811 Ground Spoiler Interlock Valve Adjustment (Alternate Method)
(P/B 501)
27-62-00-840-802 Put the Speed Brake Systems A and B Back to the Condition Before
the Pressure Removal (P/B 201)
32-13-11-420-804 Main Landing Gear Inner Door Installation (P/B 401)
B. Consumable Materials
Reference Description Specification
G01912 Lockwire - Monel (0.032 In. Dia.) NASM20995N~
C32
(QQ-N-281)
C. Location Zones
Zone Area
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
D. Prepare for the Installation
SUBTASK 27-62-51-860-007
(1) Make sure the hydraulic pressure is removed from system A. To remove it, do this task:
Remove Pressure from the Speed Brake Hydraulic Systems A and B,
TASK 27-62-00-800-802.
E. Cable Installation
SUBTASK 27-62-51-420-005
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊7 AIRCRAFT MAINTENANCE MANUA(16)