曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

source available, refueling can still be accomplished.
Fueling Hose Nozzle .............................................................ATTACHED TO
THE REFUELING RECEPTACLE
Fueling Valves.......................................................................OPEN FOR THE
TANKS TO BE REFUELED
Note: The No. 1, No. 2, and center tank refueling valves each have a red
override button that must be pressed and held while fuel is being
pumped into the tank. Releasing the override button allows the
spring in the valve to close the valve. A tool may be required to
hold the spring in the valve to the OPEN position.
Caution must be observed not to overfill a tank, since there is no
automatic fuel shut-off during manual operation. When the
desired amount of fuel has been pumped into the tanks, the
refueling valves for the respective tanks can be released. Tanks
No. 1 and No. 2 may also be refueled through filler ports over the
wing. It is not possible to refuel the center tank externally using
overwing ports.
* * * *
FUEL
Sec. 2.12 Page 10
Rev. 11/15/02 #41
Continental
737
Flight Manual
TANK TO TANK FUEL TRANSFER
GROUND OPERATION ONLY
Caution: Observe fuel quantity limits for each tank.
Fuel can be transferred from one tank to another tank by using the appropriate
fuel pumps, the defueling valve, and the crossfeed valve. Electrical AC power
must be available to transfer fuel from the wing tanks to the center and/or
auxiliary tank.
Main Tank Fuel Pump Switches.................................................................ON
Crossfeed Selector....................................................................................OPEN
Note: When the AUXILIARY TANK FUELING valve switch in the fueling bay is
OPEN, the crossfeed valve is open regardless of the position of the
crossfeed selector on the flight deck.
Manual Defueling Valve.........................................................................OPEN
Center Tank Fueling Valve Switch In The Fueling Bay
(If Fuel Transfer Into Center Tank Is Desired) ...........................OPEN
Auxiliary Tank Fueling Valve Switch
(If Fuel Transfer Into AUX Tank Is Desired) ..............................OPEN
Fuel Transfer...................................................................................MONITOR
The Center and Aux tank fuel quantity indicator will show an increase in
fuel. The main tanks will show a decrease in fuel.
Center And Aux Tank Fueling Valve Switch
In Fueling Bay ................................................................................CLOSE
When the required amount of fuel has been transferred, the switch is closed
at the fueling panel.
Manual Defueling Valve.......................................................................CLOSE
Crossfeed Selector..................................................................................CLOSE
Main Tank Fuel Pump Switches...............................................................OFF
Main Tanks .......................................................................................... REFILL
External Fueling Panel Access Door ...................................................CLOSE
* * * *
737
Flight Manual
Continental
HYDRAULICS
Sec. 2.13 TOC-1
Rev. 11/15/02 #41
2.13 – HYDRAULICS
TABLE OF CONTENTS
HYDRAULIC PUMP LOW PRESSURE OR OVERHEAT..................... 1
LOSS OF SYSTEM A ............................................................................. 1
LOSS OF SYSTEM B ............................................................................. 3
LOSS OF SYSTEM “A” & “B” (MANUAL REVERSION)........................ 5
STANDBY HYDRAULIC LOW PRESSURE.......................................... 9
STANDBY HYDRAULIC LOW QUANTITY............................................ 9
HYDRAULICS
Sec. 2.13 TOC-2
Rev. 11/15/02 #41
Continental 737
Flight Manual
INTENTIONALLY LEFT BLANK
737
Flight Manual
Continental
HYDRAULICS
Sec. 2.13 Page 1
Rev. 11/15/02 #41
HYDRAULICS
HYDRAULIC PUMP LOW
PRESSURE OR OVERHEAT
A hydraulic pump LOW PRESSURE light illuminated indicates low pump output
pressure. The hydraulic pump OVERHEAT light illuminated indicates fluid or
pump overheat.
Pump Switch................................................................................................OFF
If the action was in response to an OVERHEAT light, positioning the pump
switch OFF will cause a LOW PRESSURE light to illuminate. One pump
provides adequate pressure for normal system operation.
* * * *
LOSS OF SYSTEM A
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737 FLIGHT MANUAL 737飛行手冊1(81)