(2)
On the panel 110VU:
-make sure that the free-fall control handle is in the normal position.
1EFF : ALL 1 32-22-00Page 601 1 1 Feb 01/98 1 1 1CES 1 Subtask 32-22-00-010-050
B. Get Access WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR ARE CLEAR.
_______
(1) Open the main doors of the nose gear (Ref. TASK 32-22-00-010-001).
R (2) Make sure that the GROUND SAFETY LOCK (D23080000) or PIN-NLG DOWNLOCK R SAFETY (MZ23080000) as an alternative is in position.
(3)
Make sure that the SAFETY PIN - NLG DOOR (98D32203502000) is in position.
(4)
Put the access platform in position.
4. Procedure
_________
(Ref. Fig. 601/TASK 32-22-00-991-002)
Subtask 32-22-00-210-053
A. Visual Inspection
(1) Do a visual inspection of the rotating rod.
Make sure that:
-
the gimbal assembly is not damaged,
-
the teflon layer is in the correct condition.
5. Close-up
________
Subtask 32-22-00-410-050
A. Close access.
(1)
Remove the warning notice(s).
(2)
Remove the access platform(s).
(3) Close the main doors of the nose gear (Ref. TASK 32-22-00-410-001). Subtask 32-22-00-942-052
B. Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 32-22-00Page 602 1 1 Aug 01/05 1 1 1CES 1
Nose Gear Doors - Rotating Rod
Figure 601/TASK 32-22-00-991-002
1EFF : ALL 1 32-22-00 Page 603
1 1 Feb 01/98
1 1
1CES 1
TASK 32-22-00-220-001
Check of the Nose-Gear Doors Gaps and Mismatches
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR ARE CLEAR.
_______
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific rod (not metal)
No specific warning notice(s)
No specific access platform 2.06 m (6 ft. 9 in.)
98F32304000000 4 FALSE TARGET
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-581-003 Lifting of the Aircraft at Forward Jacking Point, MLG Wheels on the Ground
07-11-00-586-001 Lowering of the Aircraft at Forward Jacking Point,
MLG Wheels on the Ground
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power 29-10-00-863-001 Pressurize the Green Hydraulic System 29-10-00-864-001 Depressurize the Green Hydraulic System 32-00-00-481-001 Installation of the Safety Devices on the Landing
Gears 32-00-00-481-002 Installation of the Safety Devices on the Landing Gear Doors
1EFF : ALL 1 32-22-00Page 604 1 1 May 01/05R 1 1 1CES 1
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
32-00-00-860-001 Flight Configuration Precautions with Electrical Power 32-00-00-860-002 Ground Configuration after Flight Configuration with
Electrical Power
32-12-00-010-001 Open the Main Gear Doors for Access
32-12-00-410-001 Close the Main Gear Doors after Access
32-22-00-820-001 Adjustment of the NLG doors
**ON A/C 001-049, 051-061, 101-105, 201-203,
32-22-00-991-003 Fig. 602
**ON A/C 062-099, 151-199, 204-212,
32-22-00-991-003-A Fig. 602A
R **ON A/C 106-149, 213-299, 301-399, 401-499,
32-22-00-991-003-B Fig. 602B
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-212,
32-22-00-991-004 Fig. 603
R **ON A/C 106-149, 213-299, 301-399, 401-499,
32-22-00-991-004-A Fig. 603A
1EFF : ALL 1 32-22-00Page 605 1 1 Aug 01/05 1 1 1CES 1R **ON A/C ALL
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架3(145)
