(0.00 to 9.00 lbf.ft)
No specific Torque Wrench : range 0.20 to 3.60 m.daN
(2.00 to 26.00 lbf.ft) No specific Torque Wrench : range 1.00 to 10.00 m.daN
(8.00 to 75.00 lbf.ft) 98D32104083000 2 RIGGING SPACER
1EFF : ALL 1 32-12-14Page 421 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 32-12-14Page 422 1 1 May 01/05 1 1 1CES 1 D. Referenced Information
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 09-013 Material No. 09-018 Material No. 09-019 Material No. 11-026 Material No. 16-016 Material No. 19-003 Material No. 19-010 USA MIL-PRF-81733 TYPE I CLASS A CORROSION INHIBITING BRUSH CONSISTENCY (Ref. 20-31-00)USA AMS 3267/3 CORROSION INHIBITING LOW ADHESION SEALANT (Ref. 20-31-00)USA AMS 3267/3 LOW ADHESION CORROSION INHIBITING SEALANT (Ref. 20-31-00)GB DEF-STAN 68-148/1 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)C Z-12.383 EXTERNAL DECORATION PAINT (Ref. 20-31-00)USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)USA AMS 5687 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA (Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
R R R R R R 6 6 7 7 21 21 22 22 22 22 23 23 24 24 25 25 cotter pins cotter pins cotter pins cotter pins cotter pin cotter pin cotter pin cotter pin cotter pin cotter pin cotter pin cotter pin cotter pin cotter pin cotter pin cotter pin 52-81-13 01 -00552-81-13 01L-00552-81-13 01 -00552-81-13 01L-005 32-11-11 80 -00532-11-11 80C-005 32-11-11 80 -005 32-11-11 80 -04532-11-11 80C-00532-11-11 80C-045 32-11-11 80 -04532-11-11 80C-045 32-11-11 80 -00532-11-11 80C-005 32-11-11 80 -04532-11-11 80C-045
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-581-001 Lifting for Aircraft Maintenance Operations 07-11-00-586-002 Lowering of the Aircraft for Maintenance Operations 20-28-00-912-004 Electrical Bonding of Components With Conductive
Bolts and Screws and Bonding Straps in the Fuselage and in the Wings (this does not include the tanks)-32-00-00-481-001 Installation of the Safety Devices on the Landing Gears 32-00-00-860-001 Flight Configuration Precautions with Electrical Power 32-00-00-860-002 Ground Configuration after Flight Configuration with
Electrical Power 32-30-00-867-001 Retraction of the Landing Gear for Maintenance 32-30-00-867-002 Extension of the Landing Gear after Maintenance 57-55-11-400-006 Installation of the Hinge 1A Extension Fairing
**ON A/C 001-049, 051-060, 101-101,
32-12-14-991-002 Fig. 402
R **ON A/C 051-099, 102-149, 151-199, 201-299, 301-399, 401-499,
Post SB 52-1100 For A/C 051-060,
32-12-14-991-002-A Fig. 402A
**ON A/C 001-049, 051-060, 101-101,
32-12-14-991-001 Fig. 403
**ON A/C 301-399,
32-12-14-991-001-C Fig. 403A
R **ON A/C 051-099, 102-149, 151-199, 201-299, 401-499,
Post SB 52-1100 For A/C 051-060,
32-12-14-991-001-B Fig. 403B
1EFF : ALL 1 32-12-14Page 423 1 1 Aug 01/05 1 1 1CES 1 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
**ON A/C 001-049, 051-061, 101-105, 201-203,
Post SB 52-1100 For A/C 051-060,
32-12-14-991-003 Fig. 404
R **ON A/C 062-099, 106-149, 151-199, 204-299, 401-499,
32-12-14-991-003-A Fig. 404A
**ON A/C 301-399,
32-12-14-991-003-B Fig. 404B
32-12-14-991-004 Fig. 405
**ON A/C ALL
3. Job Set-up
__________
Subtask 32-12-14-941-061
A. Safety Precautions
(1)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架3(41)
