16.99 lbf.in).
(g)
Add SEALANTS (Material No. 09-004) to the bolts (5) and the nuts (8).
Subtask 32-12-11-710-050
K. Operational Test
(1) Do an operational test of the main gear doors (Ref. TASK 32-31-00-710-002).
5. Close-up
________ Subtask 32-12-11-860-055
A. Depressurize Hydraulic Systems
(1) Depressurize the Green hydraulic system. (Ref. TASK 29-10-00-864-001) Subtask 32-12-11-865-054
B. Close Circuit Breakers Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1GA, 4GG, 3GG, 1GG, 2GG, 2GA, 1701GK, 1702GK
1EFF : ALL 1 32-12-11Page 421 1 1 Feb 01/01R 1 1 1CES 1
Subtask 32-12-11-942-050
C. Remove Ground Equipment
(1)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(2)
Remove the warning notice(s).
(3)
Remove the access platform(s).
1EFF : ALL 1 32-12-11Page 422 1 1 Feb 01/01R 1 1 1CES 1
DOOR ASSY - MAIN - REPAIRS
__________________________
TASK 32-12-11-300-001
Main Landing Gear Door - Approved Repairs
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______ CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
CAUTION : DO NOT CAUSE DAMAGE TO THE SURFACES. THE COMPONENTS ARE MADE OF
_______ CARBONFIBER REINFORCED PLASTIC.
1. Reason for the Job__________________ Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific warning notice
No specific access platform 2.0 m (6 ft. 7 in.)
1EFF : ALL 1 32-12-11Page 801 1 1 Aug 01/04R 1 1 1CES 1
B. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
4 tip seal 32-12-11 01C-200 4 tip seal 32-12-11 01C-200A 8 strip sealing 32-12-11 01C-130 10 strip sealing 32-12-11 01C-050 18 strip sealing 32-12-11 01C-040
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
29-10-00-864-001 Depressurize the Green Hydraulic System
32-00-00-860-001 Flight Configuration Precautions
32-12-00-010-001 Open the Main Gear Doors for Access
32-12-00-410-001 Close the Main Gear Doors after Access
ASRM 514211007
ASRM 514211019
32-12-11-991-004 Fig. 801
3. Job Set-up
__________
R
Subtask 32-12-11-941-051
R A. Safety Precautions
(1)
Prevent the damage to the anti-ice heat elements (Ref. TASK 32-00-00-860-001)
(2)
Put the warning notice in the flight compartment to tell persons not to operate the landing gear doors in case not properly secured the door levers.
(3)
Put the access platform in position at zone 734 for the left hand main landing gear door and/or zone 744 for the right hand main landing gear door.
1EFF : ALL 1 32-12-11Page 802 1 1 Aug 01/04 1 1 1CES 1 1EFF : ALL 1 32-12-11Page 803 1 1 Aug 01/04 1 1 1CES 1
R Subtask 32-12-11-860-056
R B. Depressurize Hydraulic Systems
R (1) Depressurize the Green hydraulic system. (Ref. TASK 29-10-00-864-001)
R Subtask 32-12-11-865-055
R C. Open, safety and tag this(these) circuit breaker(s):
R -------------------------------------------------------------------------------
R PANEL DESIGNATION IDENT. LOCATION
R -------------------------------------------------------------------------------
R 49VU L/G/LGCIU/SYS1/NORM 1GA C09
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架3(28)
