(d) Remove the bush (11).
(6)
At the position F:
(a)
Remove and discard the cotter pin (12).
(b)
Remove the nut (14) and the washer (15).
(c)
Remove the bolt (18).
(d)
Remove the bush (17).
(7)
Hold the fixed fairing (1).
(8)
At the positions B, D and E, remove the bolts (7) and the bushes (6). Remove the fixed fairing (1).
**ON A/C 301-399,
Subtask 32-12-14-020-050-B
A. Removal of the MLG Fixed Fairing Assembly
WARNING : THE WEIGHT OF THE FIXED FAIRING IS 34kg (75lb).
_______
NOTE : Do not move the locknuts (3) and (11) or you will cause the fixed
____
fairing (1) to go out of adjustment.
(1)
If a new fixed fairing (1) is necessary, remove the hinge 1A extension fairing (2) (Ref. TASK 57-55-11-000-006).
(2)
Remove the screws (20) and remove the cover plates (21).
(3)
Hold the head of the screw (22) and remove the nut (10) to release the bonding strap (9) from the fixed fairing (1).
(4)
Remove and discard the cotter pins (5).
(5)
Remove the nuts (4) and the washers (6) from the bolts (8).
(6)
At the position C:
(a)
Remove and discard the cotter pin (13).
(b)
Remove the nut (14) and the washer (15).
1EFF : 001-049, 051-060, 101-101, 301-399, 1 32-12-14Page 407 1 1 Aug 01/05R 1 1 1CES 1
(c)
Remove the bolt (19).
(d)
Remove the bush (16).
(7)
At the position F:
(a)
Remove and discard the cotter pin (12).
(b)
Remove the nut (14) and the washer (15).
(c)
Remove the bolt (19).
(d)
Remove the bush (18).
(8)
Hold the fixed fairing (1).
(9) Remove the bolts (8) and the bushes (7). Remove the fixed fairing (1). R **ON A/C 051-099, 102-149, 151-199, 201-299, 401-499,
Post SB 52-1100 For A/C 051-060,
Subtask 32-12-14-020-050-A
A. Removal of the MLG Fixed Fairing Assembly
WARNING : THE WEIGHT OF THE FIXED FAIRING IS 34kg (75lb).
_______
NOTE : Do not move the locknuts (2) and (10) or you will cause the fixed
____
fairing (1) to go out of adjustment.
(1)
Remove the screws (19) and remove the cover plates (20).
(2)
Hold the head of the screw (21) and remove the nut (9) to release the bonding strap (8) from the fixed fairing (1).
(3)
Remove and discard the cotter pins (4).
(4)
Remove the nuts (3) and the washers (5) from the bolts (7).
(5)
At the position C:
(a)
Remove and discard the cotter pin (12).
(b)
Remove the nut (13) and the washer (14).
R 1EFF : 051-099, 102-149, 151-199, 201-299, 1 32-12-14Page 408 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
(c)
Remove the bolt (18).
(d)
Remove the bush (15).
(6)
At the position F:
(a)
Remove and discard the cotter pin (11).
(b)
Remove the nut (13) and the washer (14).
(c)
Remove the bolt (18).
(d)
Remove the bush (17).
(7)
Hold the fixed fairing (1).
(8)
Remove the bolts (7) and the bushes (6). Remove the fixed fairing (1).
R 1EFF : 051-099, 102-149, 151-199, 201-299, 1 32-12-14Page 409 1401-499, 1Aug 01/05 1 1 1CES 1
**ON A/C ALL
TASK 32-12-14-400-001
Installation of the MLG Fixed Fairing Assembly (That was Removed For Access Only)
WARNING : DO NOT WALK ON A CLOSED LANDING GEAR DOOR.
_______
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers
No specific warning notice
No specific access platform 3 m (9 ft. 10 in.)
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架3(37)
