**ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
32-33-16-991-007 Fig. 404 R **ON A/C 151-199, 401-499,
32-33-16-991-007-A Fig. 404A
**ON A/C ALL
32-33-16-991-008 Fig. 405
32-33-16-991-003 Fig. 406
32-33-16-991-004 Fig. 407
32-33-16-991-005 Fig. 408
32-33-16-991-009 Fig. 409
1EFF : ALL 1 32-33-16Page 434 1 1 Aug 01/05 1 1 1CES 1
3. Job Set-up
__________
Subtask 32-33-16-941-053
A. Safety Precautions
(1)
Make sure that the safety barriers are in position.
(2)
Make sure that the ground safety locks are on the landing gear (Ref. TASK 32-00-00-481-001).
(3)
On the panel 400VU:
-
make sure that the landing-gear control-lever 6GA is in the DOWN position
-
make sure that the warning notice is in position to tell persons not to operate the landing gear.
(4)
On the panel 110VU, make sure that the GRAVITY GEAR EXTN handle is folded into the center console.
(5)
Make sure that a wedge is on each side of the GRAVITY GEAR EXTN handle to lock the handle in position.
R **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
Subtask 32-33-16-860-052
B. Aircraft Maintenance Configuration (Ref. Fig. 401/TASK 32-33-16-991-006, 402/TASK 32-33-16-991-001, 404/TASK 32-33-16-991-007, 405/TASK 32-33-16-991-008)
(1)
Make sure that the MLG doors are open (Ref. TASK 32-12-00-010-001).
(2)
Make sure that a GROUND LOCK SLEEVE is installed on each MLG door (Ref. TASK 32-00-00-481-002).
(3)
Make sure that the lateral avionics-compartment doors 822 and 824 are open.
(4)
Make sure that the forward cargo-compartment door 825 is open (Ref. TASK 52-30-00-860-001).
(5)
Make sure that the forward cargo-compartment ceiling-panels 131AC, 131BC and 131CC are removed.
1EFF : ALL 1 32-33-16Page 435 1 1 May 01/05 1 1 1CES 1
(6)
Make sure that the forward cargo-compartment rear-partition 132PW is removed.
(7)
Make sure that the passenger-compartment floor-panels are removed (Ref. TASK 53-32-12-000-002):
-242BF, 241EF, 241FF, 242FF, 242GF, 241JF
-241KF, 242KF, 241LF, 242LF, 241MF, 242MF.
(8)
Make sure that the cockpit floor panels are removed 212GF and 212NF (Ref. TASK 53-12-11-000-001).
(9)
Make sure that the forward fuselage floor panels 222CF, 222EF and 232DF are removed (Ref. TASK 53-12-12-000-001).
(10)
For the cables (13), (15), (25) and (27):
-
make sure that the RIGGING PIN (98A27801001000) is in the Pin 1 position
-
make sure that the RIGGING PIN (98DNSA20208150) is in the Pin 2 position.
(11)
For the cables (37), (38), (39) and (40):
-
make sure that the RIGGING PIN (98DNSA20208150) is in the Pin 2 position
-
make sure that the RIGGING PIN (98DNSA20208060) is in the Pin 3 position.
R **ON A/C 151-199, 401-499,
Subtask 32-33-16-860-052-A
B. Aircraft Maintenance Configuration (Ref. Fig. 401/TASK 32-33-16-991-006, 402/TASK 32-33-16-991-001, 404A/TASK 32-33-16-991-007-A, 405/TASK 32-33-16-991-008)
(1)
Make sure that the MLG doors are open (Ref. TASK 32-12-00-010-001).
(2)
Make sure that a GROUND LOCK SLEEVE is installed on each MLG door (Ref. TASK 32-00-00-481-002).
(3)
Make sure that the lateral avionics-compartment doors 822 and 824 are open.
(4)
Make sure that the forward cargo-compartment door 825 is open (Ref. TASK 52-30-00-860-001).
1EFF : ALL 1 32-33-16Page 436 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 32-33-16Page 437 1 1 Feb 01/03 1 1 1CES 1 Subtask 32-33-16-865-054
R (5) Make sure that the forward cargo-compartment ceiling-panels 131MC and
R 131NC are removed.
R (6) Make sure that the forward cargo-compartment rear-partition 132PW is
R removed.
R (7) Make sure that the passenger-compartment floor-panels are removed
R (Ref. TASK 53-32-12-000-002):
R - 242BF, 241EF, 241FF, 242FF, 242GF, 241JF
R - 241KF, 242KF, 241LF, 242LF, 241MF, 242MF.
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架6(27)
