(b)
Make sure that the electrical connectors are clean and in the correct condition.
(c)
Connect the electrical connectors (16) to the escape-hatch handle light (15).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 33-51-11Page 431 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C ALL
Subtask 33-51-11-865-051
D. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1WL, 2WL.
Subtask 33-51-11-861-050
E. Energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002). Subtask 33-51-11-710-050
F. Do this test.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. In the cockpit on the SIGNS panel 25VU:
-set the EMER EXIT LT switch 4WL to the ON position.
2. In the cockpit, on the SIGNS panel 25VU:
-set the EMER EXIT LT switch 4WL to the OFF position.
In the cockpit, on the SIGNS panel25VU:
-
the EMER EXIT LT OFF annunciator 5WL
goes off. In the cabin:
-
the related emergency light comes on.
In the cockpit, on the SIGNS panel25VU:
-
the EMER EXIT LT OFF annunciator 5WL
comes on. In the cabin:
-
the related emergency light goes off.
R 1EFF : ALL 1 33-51-11Page 432 1 1 May 01/05 1 1 1CES 1
5. Close-up
________
**ON A/C 001-049, 051-099, 101-149, 201-299,
Subtask 33-51-11-410-053
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Install the access panels 241CW, 242CW, 241LW, 242LW. R **ON A/C 151-199, 401-499,
Subtask 33-51-11-410-053-A
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Install the access panels 241FW, 242FW.
**ON A/C ALL
Subtask 33-51-11-862-050
B. De-energize the aircraft electrical circuit (Ref. TASK 24-41-00-862-002).
LIGHT - FLOOR PROXIMITY EMERGENCY ESCAPE PATH MARKING - REMOVAL/INSTALLATION
____________________________________________________________________________
R **ON A/C 001-049, 101-105, 151-199, 201-228, 301-302,
TASK 33-51-12-000-001
Removal of the Marking Light of the Floor-Proximity Emergency-Escape Path (LSI)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R **ON A/C 001-049, 101-105, 201-210,
33-51-12-991-001 Fig. 401
**ON A/C 151-199,
33-51-12-991-001-A Fig. 401A R **ON A/C 211-228,
33-51-12-991-001-B Fig. 401B
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 33-51-12Page 401 1201-228, 301-302, 1May 01/05 1 1 1CES 1 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R **ON A/C 301-302,
33-51-12-991-001-D Fig. 401C R **ON A/C 001-049, 101-105, 151-199, 201-228, 301-302,
3. Job Set-up
__________
Subtask 33-51-12-865-050
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU LIGHTING/EMER LT/CABIN 2WL H06 49VU LIGHTING/EMER LT/CABIN 1WL H05
Subtask 33-51-12-860-050
B. Aircraft Maintenance Configuration
(1)
Make sure that the EMER EXIT LT switch 4WL on the overhead panel 25VU is in the OFF position.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LIGHTS 燈光2(135)
