(2)
 Remove the access platform(s).

 (3)
 Remove the ground support and maintenance equipment, the special and standard tools an all other items.

 TASK 33-47-00-440-001

 Reactivation of the logo light lens (cover)
 1. Reason for the Job
__________________
R Refer to the CDL TASK: 33-5 R Logo light lens (cover)
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  circuit breaker(s) safety clip(s)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-862-002  De-energize the Aircraft Electrical Circuits Supplied from the External Power 33-47-11-600-001 Servicing of the Logo Light 3LY (4LY)
 3. Job Set-up
__________
 Subtask 33-47-00-860-056

 A. Aircraft Maintenance Documentation
 (1) On panel 25VU make sure that the switch 3LA NAV & LOGO ON/OFF is in the OFF position.
 Subtask 33-47-00-860-057
 B. De-energize Electrical Circuits
 (1) De-energize electrical circuits.(Ref. TASK 24-41-00-862-002)

 Subtask 33-47-00-865-055

 C. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------122VU LIGHTING/LOGO/L 2LY V03 122VU LIGHTING/LOGO/R 1LY V02
 Subtask 33-47-00-941-053
 D. Safety Precautions
 (1) Put the warning notices in the flight compartment to tell the persons not to operate the logo light
 Subtask 33-47-00-010-050
 E. Get access
 (1) Put the access platform in position 334ABfor the left hand logo light and/or zone 344AB for the right hand logo light.
 4. Procedure_________
 Subtask 33-47-00-440-051 
R  A. Reactivation of the Logo Light Lens
 (1) Remove the high speed tape cover from the logo light hole
 (2) Clean the area arrond the hole of the tape adhesive. 
R  (3) Install the logo light lens (Ref. TASK 33-47-11-600-001) 
R R  (4) Write a note in the aircraft technical log that the logo light lens of the tail navigation light has been reactivate.
 5. Close-up________
 Subtask 33-47-00-865-056
 A. Close this (these) circuit breaker(s): 1LY, 2LY

 Subtask 33-47-00-942-054

 B. Remove the equipment
 (1)
 Make sure that the area is clean and clear of tool(s) and other items.

 (2)
 Remove the access platform.

 (3)
 Remove the ground support and maintenance eqipment, the special and standard tools and other items.

 LOGO LIGHTS - ADJUSTMENT/TEST
_____________________________ TASK 33-47-00-710-002 Operational Test of the Logo Lights WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______ YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
 1.
 Reason for the Job

__________________
 To make sure that the logo lights operate correctly.

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
 from the External Power 27-50-00-866-008 Extension of the Flaps on the Ground 27-50-00-866-009 Retraction of the Flaps on the Ground 31-32-00-860-009 Procedure to Get Access to the SYSTEM REPORT/TEST/L/G
 Page 32-00-00-860-001 Flight Configuration Precautions 32-00-00-860-002 Ground Configuration after Flight Configuration
 3. Job Set-up
__________ Subtask 33-47-00-860-050
 A. Aircraft Maintenance Configuration
 (1)
 Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).

 (2)
 Do the procedure of the flight configuration precautions (Ref. TASK 32-00-00-860-001).

 (3)
 Get access to the L/G page on the MCDU (Ref. TASK 31-32-00-860-009).
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LIGHTS 燈光2(33)