B. Referenced Information -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------33-41-15-000-001 Removal of the Tail Navigation Light 15LA
R  **ON A/C 051-099, 106-149, 156-199, 209-299, 301-399, 401-499, Post SB 33-1037 For A/C 051-099, 33-48-13-991-001 Fig. 401

 **ON A/C ALL

 3. Job Set-up
__________
 Subtask 33-48-13-865-050

 A. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU APU/APU/CTL 2KD L42 121VU APU/ECB/SPLY 1KD L41 122VU LIGHTING/EXT LT/NAV1/AND LOGO/LT 1LA T03 122VU LIGHTING/EXT LT/NAV2/AND LOGO/LT 2LA T02 122VU LIGHTING/WING/STROBE 10LV V05
 Subtask 33-48-13-010-050
 B. Get Access
 (1)
 Put the access platform in position at the APU tail cone exhaust-area Zone 317.

 (2)
 Remove the tail navigation light (3) (Ref. TASK 33-41-15-000-001).

 4. Procedure
_________ R **ON A/C 051-099, 106-149, 156-199, 209-299, 301-399, 401-499, Post SB 33-1037 For A/C 051-099, (Ref. Fig. 401/TASK 33-48-13-991-001) **ON A/C ALL
 Subtask 33-48-13-020-050
 A. Removal of the Tail Cone Strobe-Light (19LV) WARNING : DO NOT REMOVE THE STROBE LIGHT FOR AT LEAST TEN MINUTES AFTER
_______ YOU DE-ENERGIZE THE ELECTRICAL CIRCUITS. THE HIGH VOLTAGE ELECTRICAL CURRENT IN THE CAPACITOR OF THE STROBE LIGHT IS DANGEROUS.

 Tail Cone Strobe-Light
 Figure 401/TASK 33-48-13-991-001

R 1EFF : 051-099, 106-149, 156-199, 209-299, 1 33-48-13Page 403 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 WARNING : DO NOT DISCONNECT THE ELECTRICAL CONNECTIONS FOR AT LEAST 2
_______
 MINUTES AFTER YOU DE-ENERGIZE THE ELECTRICAL CIRCUITS.
 WARNING : BE CAREFUL IF YOU TOUCH THE STROBE LIGHT WITH THE COVER REMOVED
_______ AND THE POWER APPLIED. SOME COMPONENTS HAVE DANGEROUS VOLTAGES.
 WARNING : DO NOT TOUCH THE STROBE LIGHTS FOR AT LEAST 5 MINUTES AFTER
_______ OPERATION. THE STROBE LIGHT WILL STILL BE HOT.
 (1)
 Remove the screws (1), the washers (2) and the tail cone strobe-light

 (4) from the tail navigation light (3).

 (2)
 Remove the screws (5) and the lens (6).

 (3)
 Remove and discard the gasket (7). CAUTION : DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS.

_______ THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.

 (4)
 Remove the screws (8) and the flash tube assembly (9).

 1EFF : ALL 1 33-48-13Page 404 1 1 Feb 01/05R 1 1 1CES 1

 TASK 33-48-13-400-001
 Installation of the Tail Cone Strobe-Light (19LV)

 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  clean, soft, lint-free cloth
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-002  USA MIL-P-8116 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)
 C. Expendable Parts
 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
gasket  33-48-13 01 -020
 1EFF : ALL 1 33-48-13Page 405 1 1 Feb 01/05R 1 1 1CES 1

 D. Referenced Information -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------33-41-15-400-001 Installation of the Tail Navigation Light 15LA
 33-48-00-710-002  Operational Test of the Anti-Collision/Strobe Lighting R **ON A/C 051-099, 106-149, 156-199, 209-299, 301-399, 401-499, Post SB 33-1037 For A/C 051-099, 33-48-13-991-001 Fig. 401 **ON A/C ALL
 3. Job Set-up
__________
 Subtask 33-48-13-865-051

 A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LIGHTS 燈光2(55)