2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-46-12-000-001 Removal of the Taxi Light (8LR) 33-46-12-400-001 Installation of the Taxi Light (8LR)
 3. Job Set-up
__________ Subtask 33-46-00-941-051
 A. Safety Precautions
 (1) Put a warning notice on the EXT LT section of the panel 25VU to tell persons not to operate the taxi light.
 1EFF : ALL 1 33-46-00Page 404 1 1 May 01/04R 1 1 1CES 1

 Subtask 33-46-00-865-053
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
122VU LIGHTING/EXT LT/TAXI AND TAKE OFF/TAXI 1LR W08
 4. Procedure
_________ Subtask 33-46-00-440-050
 A. Reactivation of the Taxi Light
 (1) Replace the taxi light (Ref. TASK 33-46-12-000-001) and (Ref. TASK 33-46-12-400-001).
 5. Close-up
________ Subtask 33-46-00-865-054
 A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1LR
 Subtask 33-46-00-942-052
 B. Put the aircraft back to its initial configuration.
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the warning notice(s).

R  TASK 33-46-00-040-002 
R  Deactivation of the Take Off Light (7LR) 
R  1. Reason for the Job__________________ 
R  Refer to the CDL TASK: 33-9 
R  Take Off Light 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific circuit breaker(s) safety clip(s) 
R  No specific soap solution 
R  B. Consumable Materials 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  Material No. 05-065 C Z-24.380 
R  EROSION PROTECTIVE TAPE (Ref. 20-31-00) 
R  Material No. 19-003 USA AMS 3819 
R  LINT-FREE COTTON CLOTH (Ref. 20-31-00) 
R  C. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  33-46-11-000-001 Removal of the Take Off Light (7LR) 
R  33-46-11-400-001 Installation of the Take Off Light (7LR)

R  3. Job Set-up__________ 
R  Subtask 33-46-00-941-052 
R  A. Safety Precautions 
R  (1) Put a warning notice in position on the EXT LT section of the 
R  overhead panel 25VU to tell persons not to operate the take off 
R  light. 
R  Subtask 33-46-00-865-055 
R  B. Open, safety and tag this(these) circuit breaker(s): 
R  -------------------------------------------------------------------------------
R  PANEL DESIGNATION IDENT. LOCATION 
R  -------------------------------------------------------------------------------
R  122VU LIGHTING/EXT LT/TAXI AND TAKE OFF/TO 3LR W07 
R  4. Procedure_________ 
R  Subtask 33-46-00-040-051 
R  A. Deactivation of the Take Off Light 
R  CAUTION : IF THE LAMP IS REMOVED, SAFETY THE WIRES WITH HIGH-SPEED TAPE._______ 
R  (1) You must remove (Ref. TASK 33-46-11-000-001) or replace (Ref. TASK 
R  33-46-11-000-001) and (Ref. TASK 33-46-11-400-001) the take off light 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LIGHTS 燈光2(20)