(3)
 If necessary, remove the handle spring (20) as follows:

 (a)
 Remove the mounting nut (18) from the spring bolt (19).

 (b)
 Remove the spring bolt (19), the bush (71) and the handle spring

 (20) from the door beam 4.

 (c)
 Disassemble the handle spring (20) from the spring bolt (19).

 (4)
 If necessary, remove the connection rod (45) from the link lever (40) as follows:

 (a)
 Remove and discard the cotter pin (41) from the nut (42).

 (b)
 Remove the nut (42), washers (43) and the bolt (44).

 (c)
 Disconnect the lower fork-end of the connection rod (45) from the link lever (40).

 (5)
 If necessary, remove the control rod (57) from the locking shaft lever (52) as follows:

 (a)
 Remove and discard the cotter pin (53) from the nut (54).

 (b)
 Remove the nut (54), washers (55) and the bolt (56).

 (c)
 Disconnect the lower fork-end of the control rod (57) from the locking shaft lever (52).

R 1EFF : 106-149, 221-299, 301-399, 401-499, 1 52-31-21Page A475 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,

 TASK 52-31-21-400-010
 Installation of the Door Handle Assembly and the Related Linkage Mechanism
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  access platform 3.5 m (11 ft. 6 in.)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific  09016
 Material No. 04-004  USA MIL-PRF-23827 TYPE I
 SYNTH.ESTER BASED GREASE HIGH PRESSURE
 (Ref. 20-31-00)

 Material No. 04-017  USA A-A-59173
 SILICONE GREASE (Ref. 20-31-00)

 Material No. 09-018  USA AMS 3267/3
 CORROSION INHIBITING LOW ADHESION SEALANT
 (Ref. 20-31-00)

 Material No. 15-005  AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 15-006  AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
R 1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-31-21Page A476 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 C. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
 -------------------------------------------------------------------------------
22 cotter pins 52-31-21 30 -060 41 cotter pin 52-31-21 30 -150 46 cotter pin 52-31-21 30 -380 53 cotter pin 52-31-21 30 -150 61 cotter pin 52-31-21 30 -150
 D. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
12-22-52-640-002 Lubrication of the FWD and AFT Cargo-Compartment Doors 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
 Yellow Electric Pump 52-31-00-710-001 Operational Test of the FWD Cargo-Compartment Door 52-31-00-720-001 Functional Test of the FWD Cargo-Compartment Door 52-31-11-820-002 Adjustment of the Door Mechanism 52-71-00-820-004 Adjustment of the Proximity Switches 28WV and 34WV of
 the Locking Handle of the Cargo Compartment Doors
 **ON A/C 001-049, 053-099, 101-105, 151-199, 201-220,
 52-31-21-991-021 Fig. 412
R **ON A/C 106-149, 221-299, 301-399, 401-499,
 52-31-21-991-021-A Fig. 412A
 **ON A/C 001-049, 053-099, 101-105, 151-199, 201-220,
 52-31-21-991-015 Fig. 413
R 1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-31-21Page A477 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R  **ON A/C 106-149, 221-299, 301-399, 401-499,
 52-31-21-991-015-A Fig. 413A **ON A/C 001-049, 053-099, 101-105, 151-199, 201-220,
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM DOORS 艙門4(134)