On the FWD cargo door:

-
the cargo door must stay in the sameposition.

On the FWD cargo door:

-
the target lever of the switchmechanism moves outboards,

-
the target of the control lever is in line with the proximity sensor.

 -
the latching hooks move to the unlocked position,

On the FWD cargo door:

-
the cargo door moves in the closedirection.

 -when the cargo door is fully closed, the interlock mechanism does not block the latching shaft.
On the FWD cargo door:
R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 52-31-00Page 512 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
- examine the cargo door during  - the cargo door must close smoothly
 the movement.  and easily.
 10. On the control panel:  On the FWD cargo door:
 - release the selector when the  - the cargo door stays in the closed
 cargo door is fully closed.  position.
 11. On the FWD cargo door:  On the FWD cargo door:
 - move the door handle down to  - the latching hooks engage with the
 the LOCKED position.  latch fittings,
 - the cargo door is in the fully closed
 position,
 - the vent door closes,
 - the drift pins extend in the pockets
 of the fuselage,
 - the latching handle is in line with
 the outer skin and locked.
 On the lower ECAM DU:
 - the message CARGO goes off and the
 symbol for the FWD cargo door changes
 to green.
 On the FWD cargo door:  On the FWD cargo door:
 - make sure that the cargo door  - you can see the green mark on each
 is correctly latched and  safety cam through the indication
 locked  window.
 - make sure that the vent door  - the vent door seal touches the inner
 is correctly closed.  surface of the outer skin.
 - examine the cargo door seal of  - the door seal is compressed around
 the closed cargo door.  its length. 

R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 52-31-00Page 513 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C ALL

 5. Close-up
________ Subtask 52-31-00-860-052
 A. Put the aircraft back to the serviceable condition.
 (1)
 Do the EIS stop procedure
 (Ref. TASK 31-60-00-860-002)

 (2)
 Make sure that the Yellow auxiliary hydraulic system is depressurized (Ref. TASK 29-24-00-864-001).

 (3)
 Make sure that the aircraft electrical circuits are de-energized (Ref. TASK 24-41-00-862-002).

 Subtask 52-31-00-410-052
 B. Close Access
 (1)
 Close the access panel 134AR.

 (2)
 Install the access panel 825AR.

 (3)
 Remove the access platform(s).

 1EFF : ALL 1 52-31-00Page 514 1 1 May 01/05R 1 1 1CES 1

 TASK 52-31-00-720-001
 Functional Test of the FWD Cargo-Compartment Door
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 523100-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R No specific access platform 2.0 m (6 ft. 7 in.) R No specific 1 SPRING BALANCE 20 DAN (48 LBF) 98D52307525000 1 ADJUSTMENT TOOL - CARGO DOORS
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 29-14-00-614-002 Pressurization of the Hydraulic Reservoirs through
 the Ground Connector 29-24-00-864-001 Depressurize the Yellow Hydraulic System 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the
 Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
 Yellow Electric Pump 52-31-11-820-001 Adjustment of the FWD Cargo-Compartment Door 52-31-11-820-002 Adjustment of the Door Mechanism 52-31-13-000-001 Removal of the Lining and the Insulation 52-31-13-400-001 Installation of the Lining and the Insulation 52-31-21-000-002 Removal of the Handle Flap Mechanism 52-31-21-400-002 Installation of the Handle Flap Mechanism 52-35-13-400-002 Installation of the Proximity Switches 5MJ and 12MJ 52-71-12-400-001 Installation of the Proximity Switches 28WV and 34WV 52-71-12-400-002 Installation of the Proximity Switches 30WV and 32WV
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門4(35)