R 3. Job Set-up__________
R Subtask 52-31-00-860-056
R A. Aircraft Maintenance Configuration
R (1) Make sure that the FWD cargo compartment door (referred to as cargo
R door) is correctly closed and locked (Ref. TASK 52-30-00-860-002).
R NOTE : If necessary, operate the damage locking handle with an____
R applicable tool.
R 4. Procedure_________
R Subtask 52-31-00-220-050
R A. Check of the Cargo Door
R (1) Make sure that you can see the green mark of each safety cam through
R the indication windows of the door access panel 825AR.
R (2) Examine the vent door to make sure that it is closed and aligns with
R the cargo door skin.
R (3) Do this operational test:
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R 1. On the cargo door: On the Cargo Door:
R - try to push the vent door - the vent door must not move in its
R inboards. open direction.
R Subtask 52-31-00-040-050
R B. Deactivation of the Locking Handle
R WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______
R MATERIAL/S.
R USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
R 1EFF : 051-052, 1 52-31-00Page 402 1 1 May 01/05 1 1 1CES 1
R WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK_______
R AREA WHEN YOU USE SPECIAL MATERIALS.
R IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH
R OR IN YOUR EYES :
R -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15
R MINUTES.
R -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS.
R DO NOT BREATHE THE FUMES FROM THE MATERIAL.
R DO NOT SMOKE WHEN YOU USE THE MATERIAL.
R DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF
R HEAT.
R THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE
R AND SKIN IRRITANTS.
R (1) Clean the cargo door skin around the handle recess with CLEANING
R AGENTS (Material No. 11-016).
R (2) Cover the cutout of the handle recess with BONDING AND ADHESIVE
R COMPOUNDS (Material No. 08-061) (high-speed tape).
R 5. Close-up________
R Subtask 52-31-00-860-057
R A. Make an entry in the aircraft technical log that the locking handle of
R the cargo door is deactivated.
R 1EFF : 051-052, 1 52-31-00Page 403 1 1 May 01/05 1 1 1CES 1
R TASK 52-31-00-440-002
R Reactivation of the Locking Handle
R 1. Reason for the Job__________________
R Refer to the CDL TASK: 52-8
R Cargo door opening system
R Handle of cargo door
R 2. Job Set-up Information______________________
R A. Referenced Information
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 52-31-21-000-001 Removal of the Locking Handle Mechanism
R 52-31-21-400-001 Installation of the Locking Handle Mechanism
R ASRM 52-31-00-201
R 3. Job Set-up__________
R Subtask 52-31-00-860-058
R A. Aircraft Maintenance Configuration
R (1) Make sure that the access cover 825AR is removed from the FWD cargo
R compartment door (referred to as cargo door).
R (2) Make sure that the parts retained from the removed component are
R clean and in the correct condition.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門4(28)
