(2)
 Open the forward cargo door 825 and safety it with the actuator safety lock (Ref. TASK 52-30-00-860-001).

 1EFF : ALL 1 52-31-11Page 650 1 1 May 01/05 1 1 1CES 1

 4. Procedure
_________ R (Ref. Fig. 609/TASK 52-31-11-991-032) Subtask 52-31-11-210-073
 A. General Visual Inspection Procedure
 (1)
 Clean the component interface and/or the adjacent area.

 (2)
 Examine the locking hooks for corrosion, cracks, distortion, fretting, gouges, nicks, scratches, other damage and correct installation.

 (a) If you find corrosion, cracks, distortion, fretting, gouges, nicks, scratches or other damage:
 -Find the dimensions of the damage and the allowable limits (Ref. ASRM 52310010100).
 1 If you find damage that is less than the limit, remove it
_ (Ref. ASRM 51730000100) or (Ref. TASK 51-73-11-300-001).
 2 If you find damage that is more than the limit, repair/replace
_ the locking hook, refer to (Ref. ASRM 52310020100).
 (b) Make sure the locking hooks are correctly installed.
 (3) Examine the bushes and bolts of the locking hook mechanisms for corrosion, cracks, gouges, nicks, scratches, wear or damage and correct installation:
 (a) If you find corrosion, cracks, gouges, nicks, scratches, wear or other damage:
 -Find the dimensions of the damage and the allowable limits (Ref. ASRM 52310010100).
 1 If you find damage that is less than the limit, remove it
_
 (Ref. ASRM 51730000100).

 2 If you find damage that is more than the limit, repair/replace
_ the necessary locking hook mechanisms, refer to (Ref. ASRM 52310020100).
 (b) Make sure the bushes and bolts of the locking hook mechanisms are correctly installed.
 1EFF : ALL 1 52-31-11Page 651 1 1 May 01/05 1 1 1CES 1

R  Locking Hooks and Fork Fittings Figure 609/TASK 52-31-11-991-032
 1EFF : 1 1 1CES  ALL  1 111 52-31-11 Page 652 May 01/05

 (4) Examine the fork fitting assemblies for corrosion, cracks, distortion, fretting, gouges, nicks, scratches or other damage and correct installation.
 (a) If you find corrosion, cracks, distortion, fretting, gouges, nicks, scratches or other damage:
 -Find the dimensions of the damage and the allowable limits (Ref. ASRM 52310010100).
 1_ If you find damage that is less than the limit, remove it
 (Ref. ASRM 51730000100).
 2_ If you find damage that is more than the limit, repair/replace
 the necessary fork fitting assemblies, refer to (Ref. ASRM
 52310020100).
 5. Close-up________

 Subtask 52-31-11-410-075
 A. Close the Forward Cargo-Compartment Door
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the actuator safety lock and close the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-002).

 (3)
 Remove the access platform(s).

 1EFF : ALL 1 52-31-11Page 653 1 1 May 01/05 1 1 1CES 1 TASK 52-31-11-200-022

 General Visual Inspection of Forward Cargo Compartment Door, Actuator Attach Fittings
 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: 523105-01

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-73-11-300-001 Repair of Minor Damage on Aluminum Clad Components 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
 Yellow Electric Pump
 ASRM 52-31-00-101
 ASRM 51-73-00-001 (for corrective action)
 ASRM 52-31-00-201 (for corrective action)

R 52-31-11-991-039 Fig. 610
 3. Job Set-up
__________
 Subtask 52-31-11-010-080

 A. Get Access
 (1)
 Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position below the FWD cargo compartment door.

 (2)
 Open the FWD cargo compartment door and safety it with the actuator safety lock (Ref. TASK 52-30-00-860-001).
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM DOORS 艙門4(74)