曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  (3) Remove the access panel 825AR from the cargo door. 
R  (4) Disassmble the locking handle mechanism (Ref. TASK 52-31-21-000-001). 
R  (5) Remove the handle flap mechanism from the cargo door (Ref. TASK 52-
R  31-21-000-002). 
R  (6) Attach the cargo door to the crane to take the load from the hinge 
R  pins (Ref. TASK 52-31-11-000-001). 
R  4. Procedure_________ 
R  Subtask 52-31-11-220-058 
R  A. Measurement of the Deflection Unit 
R  (Ref. Fig. 605/TASK 52-31-11-991-027) 
R  -------------------------------------------------------------------------------
R  | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | 
R  | DETAIL |---------------------------------------|----------------------------| 
R  | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | 
R  | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | 
R  | NO. |-------------------|-------------------|---------|---------| CLEAR. | 
R  | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| 
R  |--------|---------|---------|---------|---------|---------|---------|--------| 
R  | C-C | 7.912 | 7.922 | | | 7.900 | | | 
R  | OD 1 |(0.3114) |(0.3118) | | |(0.3110) | | | 
R  | | | | 0.008 | 0.033 | | | 0.066 | 
R  | | | | (0.0003)| (0.0012)| | |(0.0025)| 
R  | C-C | 7.930 | 7.945 | | | | 7.966 | | 
R  | ID 2 |(0.3122) |(0.3127) | | | |(0.3136) | | 
R  -------------------------------------------------------------------------------

R 1EFF : 051-052, 1 52-31-11Page 638 1 1 May 01/05 1 1 1CES 1

R  Locking Handle Mechanism 
R  Figure 605/TASK 52-31-11-991-027 
R 1EFF :  051-052,  1  52-31-11 Page 639 
1  1  May 01/05
 1  1
 1CES  1

 

R  Subtask 52-31-11-220-059 
R  B. Measurement of the Locking Handle Mechanism 
R  (Ref. Fig. 605/TASK 52-31-11-991-027) 
R  -------------------------------------------------------------------------------
R  | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | 
R  | DETAIL |---------------------------------------|----------------------------| 
R  | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | 
R  | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | 
R  | NO. |-------------------|-------------------|---------|---------| CLEAR. | 
R  | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| 
R  |--------|---------|---------|---------|---------|---------|---------|--------| 
R  | D-D | 6.336 | 6.345 | | | 6.315 | | | 
R  | OD 3 |(0.2494) |(0.2498) | | |(0.2486) | | | 
R  | | | | 0.005 | 0.029 | | | 0.071 | 
R  | | | | (0.0001)| (0.0011)| | |(0.0027)| 
R  | D-D | 6.350 | 6.365 | | | | 6.386 | | 
R  | ID 4 |(0.2500) |(0.2505) | | | |(0.2514) | | 
R  -------------------------------------------------------------------------------
R  Subtask 52-31-11-220-060 
R  C. Measurement of the Handle Flap Mechanism 
R  (Ref. Fig. 606/TASK 52-31-11-991-028) 
R  -------------------------------------------------------------------------------
R  | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | 
R  | DETAIL |---------------------------------------|----------------------------| 
R  | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | 
R  | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | 
R  | NO. |-------------------|-------------------|---------|---------| CLEAR. | 
R  | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| 
R  |--------|---------|---------|---------|---------|---------|---------|--------| 
R  | C-C | 6.336 | 6.345 | | | 6.323 | | | 
R  | OD 1 |(0.2494) |(0.2498) | | |(0.2489) | | | 
R  | | | | 0.005 | 0.029 | | | 0.063 | 
R  | | | | (0.0001)| (0.0011)| | |(0.0024)| 
R  | C-C | 6.350 | 6.365 | | | | 6.386 | | 
R  | ID 2 |(0.2500) |(0.2505) | | | |(0.2514) | | 
R  -------------------------------------------------------------------------------
R  Subtask 52-31-11-220-061 
R  D. Measurement of the Handle Flap Mechanism 
R  (Ref. Fig. 606/TASK 52-31-11-991-028)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門4(71)