R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 52-31-22Page 404 1201-220, 1May 01/05 1 1 1CES 1
R Vent Door
R Figure 401A/TASK 52-31-22-991-001-B
R 1EFF : 051-052, 1 52-31-22 Page 405
1 1 May 01/05
1 1
1CES 1
(c) Disconnect the connection rod (13) from the actuator arm.
(4)
Remove and discard the cotter pins (1) from the nuts (2).
(5)
Remove the nuts (2), the washers (3),(4) and the sleeve (5) from the bolts (8).
(6)
Hold the vent door (10) and remove the washers (3) and the bolts (8) from the hinge arms of the vent door.
NOTE : Remove the vent door carefully because the springs (6) and (7)
____
are installed under load.
(7)
Remove the springs (6),(7) from the spring bolts (21) and the fittings of the vent door frame.
(8)
Remove the vent door (10) and the shim set of washers (4) from the hinge brackets of the vent door frame.
(9) Remove the sleeve (9) from the upper hinge arm of the vent door (10). R **ON A/C 106-149, 221-299, 301-399, 401-499,
Subtask 52-31-22-020-052-A
A. Removal of the Vent Door
(Ref. Fig. 401B/TASK 52-31-22-991-001-A)
(1)
Remove the bolts (18), the washers (19) and disconnect the cover (20) from the brackets of the cargo door.
(2)
Remove the connection rod (13) from the vent door (10) as follows:
(a)
Remove and discard the cotter pin (17) from the nut (16).
(b)
Remove the nut (16), the washers (15),(12), the bush (14) and the bolt (11) from the actuator arm.
(c)
Disconnect the connection rod (13) from the actuator arm.
(3)
Remove and discard the cotter pins (1) from the nuts (2).
(4)
Remove the nuts (2), the washers (3),(4) and the sleeve (5) from the bolts (8).
R 1EFF : 051-052, 106-149, 221-299, 301-399, 1 52-31-22Page 406 1401-499, 1Aug 01/05 1 1 1CES 1
Vent Door Figure 401B/TASK 52-31-22-991-001-A
R 1EFF : 106-149, 221-299, 301-399, 401-499, 1 52-31-22Page 407 1 1 Aug 01/05 1 1 1CES 1
(5) Hold the vent door (10) and remove the washers (3) and the bolts (8) from the hinge arms of the vent door.
NOTE : Remove the vent door carefully because the springs (6) and (7)
____
are installed under load.
(6)
Remove the springs (6),(7) from the spring bolts (21) and the fittings of the vent door frame.
(7)
Remove the vent door (10) and the shim set of washers (4) from the hinge brackets of the vent door frame.
(8)
Remove the sleeve (9) from the upper hinge arm of the vent door (10).
R 1EFF : 106-149, 221-299, 301-399, 401-499, 1 52-31-22Page 408 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 52-31-22Page 409 1 1 May 01/05 1 1 1CES 1 1EFF : ALL 1 52-31-22Page 410 1 1 May 01/05 1 1 1CES 1 Subtask 52-31-22-865-051
**ON A/C ALL
TASK 52-31-22-400-001
Installation of the Vent Door
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 15-005 AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
R C. Expendable Parts
R R R -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
R R 1 17 cotter pins cotter pin 52-31-22 02A-010 52-31-21 07 -040
R D. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門4(153)
