(4)
 Examine the correct function of the proximity switch 32WV with the (Ref. TASK 52-71-00-820-002).

R **ON A/C 106-149, 221-299, 301-399, 401-499,
 Subtask 52-32-21-820-058-A
 D. Adjustment Procedure
 (1)
 Push the door handle correctly into the recess of the door structure.

 (2)
 Measure the clearance between the target (3) and the related sensor

 (27) of the door sill area.
 NOTE : The clearance must be between 1.5 mm (0.0590 in.) and 2.0 mm

____
 (0.0787 in.).

 (3)
 If the clearance is in the limits, tighten the jam nuts (17) and safety them with the new tab washers (16).

 (4)
 If the clearance is not in the limits, adjust the length of the link assy (26) as follows:

 (a)
 Turn the connection rod (18) until the clearance is correct.

 (b)
 Make sure that the connection rod (18) is correctly engaged with the two fork-ends (15) and (25).

 (c)
 Tighten the jam nuts (17) and safety them with the new tab washers (16).

 (5)
 Make sure that the proximity switch 32WV (Ref. TASK 52-71-00-820-003) functions correctly.

R 1EFF : 051-052, 106-149, 221-299, 301-399, 1 52-32-21Page B401 1401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C ALL

 5. Close-up
________ **ON A/C 001-049, 053-099, 101-149, 201-299, 301-399,
 Subtask 52-32-21-410-059
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Apply STORAGE PRESERVATION (Material No. 15-005) to all the components of the switch mechanism and to the adjacent cargo door structure.

 (3)
 Install the access panel 826AR on the cargo door.

 (4)
 Make sure that the cargo door is correctly closed and the door handle is in the LOCKED position (Ref. TASK 52-30-00-860-002).

 (5) Remove the access platform(s). **ON A/C 051-052,
 Subtask 52-32-21-410-059-B
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Apply STORAGE PRESERVATION (Material No. 15-005) to all the components of the switch mechanism and to the adjacent cargo door structure.

 (3)
 Install the access panel 826AR on the cargo door.

 (4)
 Make sure that the cargo door is correctly closed and the locking handle is in the LOCKED position (Ref. TASK 52-30-00-860-002).

 (5)
 Remove the access platform(s).

R 1EFF : ALL 1 52-32-21Page B402 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 151-199, 401-499,

 Subtask 52-32-21-410-059-A
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Apply STORAGE PRESERVATION (Material No. 15-005) to all the components of the switch mechanism and to the adjacent cargo door structure.

 (3)
 Install the access panels 826AR, 826BR and 826CR on the cargo door.

 (4)
 Make sure that the cargo door is correctly closed and the door handle is in the LOCKED position (Ref. TASK 52-30-00-860-002).

 (5)
 Remove the access platform(s).

R 1EFF : 151-199, 401-499, 1 52-32-21Page B403 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,

 TASK 52-32-21-000-010
 Removal of the Door Handle and the Related linkage Mechanism
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific mounting nut (e.g. NAS 509-4)
 No specific access platform 3.5 m (11 ft. 6 in.)

 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
52-30-00-860-001  Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump
 **ON A/C 001-049, 053-099, 101-105, 201-220,
 52-32-21-991-019  Fig. 403
 **ON A/C 106-149, 221-299, 301-399,
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊(cè) AMM DOORS 艙門5(126)