(4)
Install the access panel 826AR.
(5)
Make sure that the cargo door is correctly closed and locked (Ref. TASK 52-30-00-860-002) when the test is completed.
**ON A/C 051-052,
Subtask 52-32-00-720-053
D. Check of the Proximity Switches 32WV, 34WV and 12MJ
(Ref. Fig. 503A/TASK 52-32-00-991-003)
(1)
Make sure that the cargo door is correctly closed and locked (Ref. TASK 52-30-00-860-002).
(2)
Remove the access panel 826AR to get access to the applicable proximity switches.
1EFF : 001-049, 051-061, 101-105, 201-203, 1 52-32-00Page 539 1 1 Aug 01/05R 1 1 1CES 1
R Check of the Proximity Switches 32WV, 34WV and 12MJ R Figure 503A/TASK 52-32-00-991-003
1EFF : 051-052, 1 52-32-00Page 540 1 1 May 01/05 1 1 1CES 1
(3) Do this test:
NOTE : If necessary, adjust the clearance of
____
-
the proximity switches 34WV (Ref. TASK 52-71-12-400-001),
-
the proximity switches 32WV (Ref. TASK 52-71-12-400-002),
-
the proximity switches 12MJ (Ref. TASK 52-35-13-400-002).
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the proximity switches 34WV:
-measure the clearance between the target on the locking handle and the sensor on the door structure.
2. On the proximity switches 32WV:
-measure the clearance between the target on the target lever (part of the switch mechanism) and the sensor on the cargo door sill.
3. On the cargo door:
-pull the locking handle away from the recess of the handle flap and turn it down to the UNLOCKED position.
4. On the proximity switches 12MJ:
-measure the clearance between the target on the locking shaft and the sensor on the structure.
On the proximity switches 34WV:
-
the clearance must be between 1.55 mm(0.0610 in.) and 2.05 mm (0.0807in.).
On the proximity switches 32WV:
-
the clearance must be between 1.50 mm(0.0590 in.) and 2.00 mm (0.0787in.).
On the cargo door:
-
the cargo door is in the unlockedcondition.
On the proximity switches 12MJ:
-
the clearance must be between 1.55 mm(0.0610 in.) and 2.05 mm (0.0807in.).
(4)
Install the access panel 826AR.
(5)
Make sure that the cargo door is correctly closed and locked (Ref. TASK 52-30-00-860-002) when the test is completed.
R 1EFF : 051-052, 1 52-32-00Page 541 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 062-099, 106-149, 204-299, 301-399,
Subtask 52-32-00-720-053-C
D. Check of the Proximity Switches 32WV, 34WV and 12MJ **ON A/C 062-099, 204-220,
(Ref. Fig. 503/TASK 52-32-00-991-003-A) **ON A/C 106-149, 221-299, 301-399,
(Ref. Fig. 503B/TASK 52-32-00-991-003-C) **ON A/C 062-099, 106-149, 204-299, 301-399,
WARNING : STAY AFT OF THE CARGO DOOR WHILE YOU UNLOCK IT. THE CARGO DOOR
_______ CAN OPEN SUDDENLY WHEN IT IS UNLOCKED AND CAN CAUSE INJURY.
(1)
Make sure that the cargo door is correctly closed and locked (Ref. TASK 52-30-00-860-002).
(2)
Remove the access panel 826AR to get access to the applicable proximity switches.
(3)
Do this test:
NOTE : If necessary, adjust the clearance of
____
-
the proximity switches 34WV (Ref. TASK 52-71-12-400-001),
-
the proximity switches 32WV (Ref. TASK 52-71-12-400-002),
- 中國航空網(wǎng) www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門5(15)
