-
the wing tip and the wingtip fence

 -
the trailing edge and the trailing edge devices

 -
the engine mounting pylons

 -
the main landing gear.

 (2)
 Wing Tip

 The wing tip is installed at Rib 27. The wingtip fence attaches to the outboard end of the wing tip.

 (3)
 Leading Edge and Leading Edge Devices

 The leading edge assembly is forward of the front-spar of the wing-box. It includes the inboard and the outboard leading-edge assemblies and the top and the bottom panels. The inboard and outboard leading-edge assemblies have their D-noses and panels installed on ribs which attach to the front spar. The hold-down devices and the rotary actuators (for Slat 1 tracks 2 and 3) are on other ribs. The leading edge devices are the five slats.

 (4)
 Leading Edge Slats

 The leading edge slats are installed on the wing as follows:
 -
Slat 1 is between RIB2 and RIB7

 -
Slat 2 is between RIB8 and RIB12

 -
Slat 3 is between RIB12 and RIB17

 -
Slat 4 is between RIB17 and RIB22

 -
Slat 5 is between RIB22 and RIB27.

 (5) Trailing Edge and Trailing Edge Devices
 The trailing edge structure is aft of the rear spar of the wing box and includes the inner, mid and outer rear-spar trailing-edges.
 The inner rear-spar trailing-edge includes:
 -
the shroud box

 -
the overwing panel

 -
the fixed shroud

 -
the underwing panel.

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 The mid and outer rear-spar trailing-edges include:
 -
the hinge ribs

 -
the intermediate ribs

 -
the actuating-cylinder brackets

 -
the top and bottom panels

 -
the trailing-edge support structures.

 The trailing edge devices are: - the two trailing edge flaps - the aileron - the five spoilers. 
R  **ON A/C 301-399, 
R R R R R R R R R R R  The mid and outer rear-spar trailing-edges include: - the hinge ribs - the intermediate ribs - the actuating-cylinder brackets - the top and bottom panels - the trailing-edge support structures. The trailing edge devices are: - the two trailing edge flaps with tabs - the aileron - the five spoilers. 
R  **ON A/C ALL
 (6) Trailing Edge Flaps
 The inboard and the outboard flaps are installed on the trailing edge of the wing. The inboard flap is between RIB1 and RIB9 and the outboard flap is between RIB9 and RIB22.
 (7) Aileron
 The aileron is installed on the trailing edge of the wing, between RIB22 and RIB27.
 (8) Spoilers
 There are five spoilers installed on the upper surface of each wing, forward of the trailing edge flaps. Spoiler 1 is installed between RIB5 and RIB9. Spoilers 2 thru 6 are installed between RIB10 and RIB22.

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,

 C. Wing Main Data (Ref. Fig. 003) Wing reference area ...... ........................ 122.40 m2 (1318.00 ft2) Aerodynamic mean chord ... ........................ 4.19 m (13.74 ft.) Geometric mean chord...... ........................ 3.62 m (11.87 ft.) Span ..................... ........................ 33.91 m (111.25 ft.) Aspect ratio ............. ........................ 9.40 Taper ratio (tip chord/root chord)................. 0.25 Root chord................ ........................ 6.07 m (19.91 ft.) Kink chord................ ........................ 3.76 m (12.33 ft.) Tip chord................. ........................ 1.50 m (4.92 ft.) Sweep angle (25%)......... ........................ 24 deg. 58 min. Relative thickness:
 -root ................... ........................ 15.15%

 -kink ................... ........................ 11.75%

 -tip .................... ........................ 10.84%
 Root-wing setting ........ ........................ 3.66 degrees
 Dihedral of wing reference plane................... 5.11 degrees
 Dihedral of trailing edge inboard of kink.......... 8.65 degrees
 Dihedral of trailing edge outboard of kink ........ 5.35 degrees

 **ON A/C 301-399,
 C. Wing Main Data (Ref. Fig. 003A) Wing reference area ...... ........................ 126.0 m2 (1318.00 ft2) Aerodynamic mean chord ... ........................ 4.34 m (14.23 ft.) Geometric mean chord...... ........................ 3.76 m (12.33 ft.) Span ..................... ........................ 34.1 m (111.87 ft.) Aspect ratio ............. ........................ 9.10 Taper ratio (tip chord/root chord)................. 0.24 Root chord................ ........................ 6.26 m (20.53 ft.) Kink chord................ ........................ 3.94 m (12.92 ft.) Tip chord................. ........................ 1.50 m (4.92 ft.) Sweep angle (25%)......... ........................ 24 deg. 58 min. Relative thickness:
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼1(38)