Subtask 57-20-00-010-063
 B. Get Access
 (1)
 Put the access platform in position below the zone 540(640).

 (2)
 Remove the applicable access panels:

 -
for the left wing, remove 540AB and 540BB

 -
for the right wing, remove 640AB and 640BB (Ref. TASK 57-27-11-000-001).

 4. Procedure
_________
R (Ref. Fig. 615/TASK 57-20-00-991-015)
 Subtask 57-20-00-110-064
 A. Preparation for Inspection
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (1) Use a clean MISCELLANEOUS (Material No. 19-003), made moist with CLEANING AGENTS (Material No. 11-004), to clean:
 -the RIB5, aft of the bolted panel.
 Subtask 57-20-00-210-061
 B. Detailed Visual Inspection of the Outer Wing RIB5, Aft of the Bolted Panel
 (1) Examine the RIB5, aft of the bolted panel.
 Make sure that:

 -
there is no corrosion or damage

 -
there are no scratches or scores

 -
there are no loose or damaged fasteners

 -the surface protection is in the correct condition.
 NOTE : If necessary, refer to the ASRM (Ref. ASRM 572100) for the
____
 correct repair procedure.

R  Details of the RIB5, Aft of the Bolted Panel Figure 615/TASK 57-20-00-991-015
 1EFF : 1 1 1CES  ALL  1 111 57-20-00 Page 684 Aug 01/05

 5. Close-up
________

 Subtask 57-20-00-410-064
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the applicable access panels:

 -
for the left wing, install 540AB and 540BB

 -
for the right wing, install 640AB and 640BB, (Ref. TASK 57-27-11-400-001).

 Subtask 57-20-00-942-064
 B. Removal of Equipment
 (1)
 Remove the safety barriers.

 (2)
 Remove the access platform(s).

 (3)
 Remove the warning notice(s).

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 57-20-00Page 685 1 1 Aug 01/05R 1 1 1CES 1

 TASK 57-20-00-200-015

 Detailed Inspection of Outer Wing, RIB5 and RIB6 at Skin Attachments (including Cleats), Spar-attachments, Access-cutout Surrounds ...
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 572027-01 Detailed inspection of outer wing, RIB5 and RIB6 at skin attachments (including cleats), spar-attachments, access-cutout surrounds and in region of stringer cutouts.
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific warning notices No specific adjustable access platform 3.5 m (11 ft. 6 in.) 98D27803500001 1 TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 Material No. 19-003  USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 1EFF : ALL 1 57-20-00Page 686 1 1 Aug 01/05R 1 1 1CES 1

 C. Referenced Information

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
28-00-00-910-001 Fuel Safety Procedures 28-10-00-910-001 Safety Procedures When You Do Work in a Fuel Tank 57-27-11-000-001 Removal of the Access Panel (540AB, 540BB, 540CB,
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼1(90)