(2)
 Make sure that there is no:

 (a)
 Corrosion damage:

 -If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200-P.Block001) for types of corrosion, inspection, removal and corrosion protection.

 (b)
 Other damage (cracks, scratches, stress, marks dents, bumps,...):

 -If you find this type of damage, refer to the Structural Repair Manual (Ref. SRM 511100-P.Block001) for damage classification and corrective action.
 Subtask 57-10-00-916-052
 B. Application of Temporary Protection R (Ref. Fig. 614/TASK 57-10-00-991-021)
 CAUTION : DO NOT APPLY TEMPORARY PROTECTION ON THE OXYGEN SYSTEMS.
_______ MAKE SURE THAT THE TEMPORARY PROTECTION DOES NOT GET: -ON COMPOSITE PARTS, CONTROL CABLES, PULLEYS,TEFLON BEARINGS. -ON LUBRICATED SURFACES. -IN DRAIN VALVES OR OTHER ORIFICES. TEMPORARY PROTECTION ON OR IN THESE PARTS CAN CAUSE DAMAGE.
 (1)
 Apply masking tape BONDING AND ADHESIVE COMPOUNDS (Material No. 08-074) or masking paper on the equipment and fittings adjacent to the area.

 (2)
 Apply a layer of STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-006) to the inspection area.

R  Center Wing Box - Upper Skin - Upper Surface Figure 614/TASK 57-10-00-991-021
 1EFF : 1 1 1CES  ALL  1 111 57-10-00 Page 666 May 01/05

 NOTE : This is only applicable to the top skin beams, between FR36 to
____
 FR42.

 (3) Apply a layer of STORAGE PRESERVATION (Material No. 15-007) or STORAGE PRESERVATION (Material No. 15-008) to the inspection area.
 NOTE : This is only applicable to the top skin beams, between FR36 to
____
 FR42.

 (4) Remove the masking paper or the masking tape.
 5. Close-up
________ Subtask 57-10-00-410-075
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the linings and insulation, if removed.

 (3)
 Install the floor panels between FR36 and FR42: 241HF, 241EF, 241FF, 241GF, 242FF, 242GF and 242HF (Ref. TASK 53-22-12-400-001).

 (4)
 Close the passenger/crew door 831 (841) (Ref. TASK 52-10-00-410-001).

 (5)
 Remove the access platform(s).

 1EFF : ALL 1 57-10-00Page 667 1 1 May 01/05R 1 1 1CES 1

 TASK 57-10-00-200-022
 Detailed Inspection of Outer Wing Box, External Surface of RIB 1 and Upper Surface of Triform Fitting, between Front Spar and Rear Spar
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 571199-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notices No specific 1 ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE No specific 1 FLASHLIGHT 98D27803500001 1 TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER 98D57004013000 2 HOOK-COVER (RIB 2 SURGE DOORS) 98D57004014000 2 HOOK-COVER (RIB2-SURGE DOORS)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 Material No. 19-003  USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 1EFF : ALL 1 57-10-00Page 668 1 1 May 01/05R 1 1 1CES 1

 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
28-00-00-910-001 Fuel Safety Procedures 28-10-00-910-001 Safety Procedures When You Do Work in a Fuel Tank 28-10-00-910-002 Access to the Fuel Tanks and the Work Areas 57-27-11-000-001 Removal of the Access Panel (540AB, 540BB, 540CB,
 540DB, 540EB, 540FB, 540GB, 640AB, 640BB, 640CB, 640DB, 640EB, 640FB, 640GB)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼1(56)